Advertisement
Plug the aerial directly into the AERIAL INPUT on the
1
television set. Ensure all other products are in standby
before continuing.
Connect the television to the mains, the red LED will light
2
up. The
DIGITAL
take a few moments. If the screen does not appear press
the standby button on the remote control.
To start auto tuning press OK.
3
The AUTO TUNING screen will appear and
the television will start to search for available
stations. The progress bar will move along
the line.
You must allow the television to complete
the search.
When the search is complete the television will
autmatically select programme one. The
AUTO TUNING screen will display all the
services found.
Press OK to continue.
4
DIGITAL
Auto tuning is now complete.
To select programmes press the number buttons.
NOTE:
ANALOGUE
be run to tune in the analogue stations.
For details of this, programme sorting and further
operations plus equipment connections please
refer to the TV Owner's Manual.
Quick Set Up Guide and Remote Control
TOSHIBA
Auto Tune – WLT68
Welcome screen will appear, this may
Quick Setup will need to
Thank you for choosing this Toshiba television.
First you need to tune in your television. Please
ensure aerial is connected before proceeding.
Press
to continue
AUTO TUNING
Progress
Prog. Name
Type UHF Quality
70
CBBC Channel
34
87
Community
21
EXIT
Cancel
AUTO TUNING
88 programmes found
55 TV
25 Radio
8 Text
Press OK to watch programme
Prog. Name
Type UHF Quality
1
BBC ONE
34
2
BBC TWO
34
3
ITV1
31
4
Channel 4
31
5
five
48
6
ITV2
31
Change
Watch
Page Up
Page Down
Good
Poor
Good
Good
Good
Poor
Good
Poor
Sort
Advertisement
