Running In - BMW F 800 GS 2011 Rider's Manual

switched off consecutively in the
5
reverse order.
56 If a pointer has not been moved,
or if one of the warning and
indicator lights has not been
switched on:
If it was not possible to
switch on the warning
lights, possible malfunctions
z
cannot be indicated.
Watch all warning and indicator
lights on the display.
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ABS self-diagnosis
with BMW Motorrad ABS
The readiness for operation
of the BMW Motorrad ABS is
checked by the self-diagnosis.
Self-diagnosis is performed
automatically when you switch on
the ignition. To check the wheel
sensors, the motorcycle must be
driven a few yards.
Phase 1
Checking the diagnosable
system components while
stopped.
ABS warning light flashes.
Phase 2
Checking wheel sensors while
starting off.
ABS warning light flashes.
ABS self-diagnosis
completed
The ABS warning light goes
OE
out.
If an ABS fault is indicated after
the ABS self-diagnosis is com-
pleted:
Continued driving is possible.
It must be noted that the ABS
function is not available.
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.

Running in

The first 620 mls
(1,000 km)
While running in the motorcy-
cle, vary the throttle opening
and engine-speed range fre-
quently; avoid driving for long
periods at a constant speed.
Choose curvy, slightly hilly sec-
tions of road if possible.
Observe the engine run-in
speeds.