still: overheating would result. In
5
extreme cases, the motorcycle
could catch fire.
54
Do not allow the engine to idle
unnecessarily. After starting, ride
off immediately.
Modifications
Modifications of the mo-
torcycle (e.g. engine man-
z
agement system, throttle valves,
clutch) can cause damage to the
affected components and fail-
ure of safety-related functions.
Damage caused in this way is
not covered by the warranty.
Do not make any modifications.
Checklist
Use the following checklist to
check important functions, set-
tings and wear limits before you
ride off:
Brakes
Front and rear brake fluid levels
Clutch
Damping setting and spring
preload
Tread depth and tire inflation
pressure
Firm seating of cases and lug-
gage
At regular intervals:
Engine oil level (every time you
refuel)
Brake pad wear (during every
third stop for refueling)
Tension and lubrication of drive
chain
Starting
Starting the engine
Emergency-off switch (kill
switch) in normal operating
position a.
Transmission lubrication
is only ensured when the
engine is running. Insufficient lu-
brication can lead to transmission
damage.
Do not allow the motorcycle to
roll for longer periods or push it
over longer distances with the
engine switched off.
Switch on ignition.