Related Manuals for Christopher Ward C3
Summary of Contents for Christopher Ward C3
- Page 1 C3 Malvern Chronograph Forum Edition Owner’s handbook...
-
Page 2: Table Of Contents
How to operate your C3 Malvern Chronograph 4–14 You have made an investment, a good one, Our watch care programme... -
Page 3: C3 Malvern Chronograph Forum Edition
An apt way of showing how the process can come C3 Malvern Chronograph Mk III provides a sound full circle, the C3 Forum Limited Edition – a watch foundation upon which Forum members could build whose run is limited to just fifty pieces – showcases their own distinctive vision. -
Page 5: Technical Information
C3 Malvern Chronograph Forum Edition Technical information Features – Italian hand-crafted oak leather quick-release strap with dress buckle, Italian hand-stitched – Swiss made Shell Cordovan quick-release strap with Bader – Limited Edition of 50 pieces deployment, or ‘Milanese’ mesh bracelet –... -
Page 7: How To Operate Your C3 Malvern Chronograph
How to operate your C3 Malvern Chronograph Setting the time/date 1. Crown position 2. Date setting 3. Time setting... - Page 8 How to operate your C3 Malvern Chronograph The crown should sit flush to the case (position 1) PLEASE NOTE: Date correction should not be carried out between 20.00 hr and 02.00 hr in order to maintain water resistance. as the watch gearing will already be aligning •...
- Page 9 How to operate your C3 Malvern Chronograph Timing functions Start Stop PUSH-BUTTON A STOP START START To stop the timing, press push-button A once Before using the timing functions, please ensure that: • The crown is in position 1 more and read the three chronograph hands, •...
- Page 10 How to operate your C3 Malvern Chronograph Restart/Stop Reset RESTART STOP START PUSH-BUTTON B RESET To restart the timing, press push-button A again To reset the timing, press push-button B (timing is resumed). (The 3 chronograph hands will be reset to their zero positions).
- Page 11 How to operate your C3 Malvern Chronograph Adjusting chronograph hands to zero positon PUSH-BUTTON A PUSH-BUTTON B • Keep push-buttons A and B depressed If one, or several, chronograph hands are not in their simultaneously for at least 2 seconds correct zero positions they will need to be adjusted: (the centre stop-second hand rotates by 360°,...
- Page 12 How to operate your C3 Malvern Chronograph Adjusting the centre stop second Adjusting the hour/minute counter Single step 1 x short Single step 1 x short Continuous long Continuous long Once the 3 chronograph hands have been When correct press push-button B to set.
- Page 13 Pull open the clasp The following guidelines explain how easy and locate the opening. it is to use and adjust your Christopher Ward strap or bracelet. Thread the strap through the opening to the desired...
- Page 14 How to operate your C3 Malvern Chronograph Using the quick-release pins on your strap 1. Locate the quick-release pin on your strap. 2. To reattach your strap, align the pins to the Pull the pin to the side to detach your strap.
-
Page 15: How To Operate Your C3 Malvern Chronograph
How to operate your C3 Malvern Chronograph Water resistance 1 ATM (10 metres) Safe to wear your watch while washing your hands with tap water. Although your watch has been through vigorous 3 ATM (30 metres) static pressure testing, it is worth remembering that... -
Page 16: Our Watch Care Programme
Our success depends on you being completely happy with your new care and attention, your new Christopher Ward Christopher Ward watch. You have up to 60 days to return your watch, watch has the potential to become an heirloom absolutely free of charge, and receive a replacement or full refund by piece giving further joy to future generations. -
Page 17: Keeping In Touch
Keeping in touch with Christopher Ward From small beginnings just a few short years ago As the owner of a Christopher Ward watch, (our first workshop was actually a refurbished if ever you need to get hold of us we are at chicken shed!), Christopher Ward has won a worldwide your service. - Page 18 Head Office 1 Park Street, Maidenhead, Berkshire SL6 1SL United Kingdom Customer Services UK: +44 (0)1628 763040 USA: +44 (0)1.877.226.8224 customerservices@christopherward.co.uk technical@christopherward.co.uk christopherward.co.uk...