Summary of Contents for Christopher Ward C3 MALVERN
Page 1
Time on your side... Your Christopher Ward watch has been designed and engineered by highly talented craftspeople to ensure not only accurate and precise timekeeping but also to bring a real pride of ownership that only luxury items of the highest quality can ever hope to deliver.
Page 2
Caring for your Christopher Ward quartz watch Your C3 Malvern Chronograph is constructed from the finest components and materials available Should you need a replacement part - don’t worry, we keep stocks of spare parts for years, even for including one of Switzerland’s finest quartz movements.
Description of the display and control buttons Setting the time Second hand For a superior water resistance your crown is of the screw-in type. To get to position turn the crown Display elements Control buttons anti-clockwise until it releases itself. Second hand Pull out the crown to position (the watch...
Setting the date (quick mode) Setting the date/time Pull out the crown to position (the watch Example: Crown continues to run). Date / time on the watch: 17th / 01.25 hr Present date / time: 4th / 20.30 hr Turn the crown clockwise until the correct date appears.
Page 6
Chronograph: Second hand Pull out the crown to position (the watch minute counter measures 30 minutes per rotation. stops). centre stop-second measures 60 seconds per rotation. 1⁄ 1 0 second counter measures 1 second per rotation. After 30 minutes this counter works as an hour counter.
Chronograph: Chronograph: Minute counter Minute counter Push-button A Push-button A Basic function Accumulated timing (Start / Stop / Reset) Example: (start timing). Start: Example: Start: Press push-button A. Stop: (e.g. 15 min 5 sec following Stop: to stop the timing, press push-button A Restart: (timing is resumed).
Chronograph: Adjusting the chronograph Minute counter Minute counter Push-button A Intermediate or interval timing hands to zero position Example: Example: Start: (start timing). One or several chronograph hands are not in their correct zero positions and have to be Display interval: adjusted (e.g.
Page 9
Fitting the bracelet Adjusting the centre stop second Single step 1 x short Continuous long If you find the bracelet needs adjusting to your wrist we recommend you have it re-sized by a reputable watch repairer or jeweller. Most local jewellers will either do this for free or perhaps make When correct press button B to set.
The quick-release butterfly clasp Water resistance The strap versions of the C3 Malvern Chronograph use quick-release butterfly clasps. If you are Please note. these are only guidelines unfamiliar with the butterfly clasp system just follow our 8 step guide below.
Page 11
- many of whom have become friends. As the owner of a Christopher Ward watch, if ever you need to get hold of us we are at your service. We have listed some useful contact details on the back cover.
Need help?
Do you have a question about the C3 MALVERN and is the answer not in the manual?
Questions and answers