Table of Contents
Advertisement
Quick Links
4 TON HYDRAULIC RAM SYSTEM
Item Number W1650
OWNER'S MANUAL
WARNING
It is the owner and/or operators' responsibility to study all WARNINGS, operating, and maintenance
instructions contained on the product label and instruction manual prior to operation of this product.
The owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels
and while in use, maintaining the unit in good working order. If the owner and/or operator are not
fluent in English, the product warnings and instructions shall be read and discussed with the
operators' native language by the purchaser/owner or his designee. Make sure that the operator
comprehends its contents. Safety information shall be emphasized and understood prior to usage.
The product shall be inspected per the operating instructions.
Users of this product must fully understand these instructions. Each person operating this product
must also be of sound mind and body and must not be under the influence of any substance that
might impair their vision, dexterity, or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Performance Tool W1650
Summary of Contents for Performance Tool W1650
- Page 1 4 TON HYDRAULIC RAM SYSTEM Item Number W1650 OWNER’S MANUAL WARNING It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this product.
- Page 2 SAFETY GUIDELINES / DEFINITIONS REPLACEMENT PARTS LIST This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information available at the time of publication.
- Page 3 REPLACEMENT PARTS LIST IMPORTANT SAFETY INFORMATION 1. Study, understand, and follow all instructions 11. Store tools/equipment out of reach of before operating this device. children and other untrained persons. Tools and equipment are dangerous in the hands 2. DO NOT exceed rated capacity. Overloading of untrained users.
- Page 4 PACKAGING CONTENTS TROUBLESHOOTING This Performance Tool® product was constructed with quality materials and workmanship and will give you many years of trouble free use when cared for as described in the "Care & Maintenance" section on page 7-8. However, as with any mechanical device, periodic adjustments are necessary to maintain a peak level of performance.
- Page 5 CARE & MAINTENANCE SETUP INSTRUCTIONS Note: The Flange Base and Flange Head must only be used together to prevent an off 6. For best results, use only hydraulic center load. Fig. 5 fluid with a rating of SAE 20 for refills. Note: When positioning the Ram (3) use a smaller attachment on the side that is to be Check fluid level with pump in fully down bent instead of the stationary side.
- Page 6 2. Replace worn or damaged parts with its accessories free of hydraulic fluid 4A. Using Ram (2): c. Position the Ram (2) so that the Base Performance Tool® replacement parts. and grease. Use only a mild detergent Be sure that only qualified person- a. Connect the appropriate Base is resting against a frame member and damp cloth when cleaning.
- Page 7 90 days from the date of purchase, provided that product is returned to place of purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL®...
Need help?
Do you have a question about the W1650 and is the answer not in the manual?
Questions and answers