Craftex thermadry Instruction Manual

Advertisement

Quick Links

Instructions for use

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the thermadry and is the answer not in the manual?

Questions and answers

Summary of Contents for Craftex thermadry

  • Page 1 Instructions for use...
  • Page 2 THIS APPLIANCE IS SUITABLE FOR USE IN ENVIRONMENTS SUCH AS SCHOOLS, HOTELS, HOSPITALS AND OFFICES. THIS APPLIANCE IS CE APPROVED. CLEANING WIDTH OF 400mm. WARNING: DO NOT USE THE APPLIANCE WITHOUT READING THE INSTRUCTION MANUAL. CAUTION: THIS MACHINE IS NOT SUITABLE FOR PICKING UP HAZARDOUS DUST OR FLAMMABLE MATERIALS.
  • Page 3 OPERATING INSTRUCTIONS ATTACHING DRIVE BOARDS AND PADS • Tilt the machine back on its wheels until the back of the motor housing is resting on the floor exposing the drive mechanism at the front. • A drive board or the brush should now be placed on the drive mechanism and locked in place by turning anti-clockwise.
  • Page 4 Always remove the drive board/brush before storing the machine. • The machine has been designed for use with the drive boards/brush supplied by Craftex – the fitting of other boards may affect its safety – for a guide to different board types and their intended use –...
  • Page 5 DOES THE ‘THERMADRY’ SYSTEM HAVE ANY LIMITATIONS? • The Thermadry machine can be used to clean all types of carpet except ‘Horse Hair’ type carpet tiles. • At present, the Thermadry is unable to be used for cleaning stairs and upholstery.
  • Page 6 THERMADRY DIAGRAM 1. HEIGHT ADJUSTMENT CONTROL 2. SAFETY SWITCH 3. POWER ON LIGHT 4. ON/OFF LEVER 5. THERMOSTAT 6. AIR TEMPERATURE ADJUSTMENT...

Table of Contents