Linksys WMP54GS Quick Installation

®
A Division of Cisco Systems, Inc.
Package Contents
• Wireless-G PCI Adapter with SpeedBooster
• External Antenna
• Setup Wizard CD-ROM
• User Guide on CD-ROM
• Quick Installation and Registration Card
2.4
GHz
Wireless-G
802.11g
PCI Adapter with SpeedBooster
Quick Installation for Windows 98SE, Me, & 2000
Wireless
Model No.
WMP54GS
Model No.
1
Install the Adapter's Software
The Setup Wizard will guide you
through the installation procedure
for Windows 98SE, Millennium, or
2000. The Setup Wizard will install the
Wireless Network Monitor and driver,
as well as configure the Adapter.
A
Insert the Setup Wizard CD-
ROM into your CD-ROM drive.
The Setup Wizard should run
automatically, and the
Welcome screen should
appear. If it does not, click the
Start button and choose Run.
In the field that appears, enter
D:\setup.exe (if "D" is the letter
A
of your CD-ROM drive).
B
To install the Adapter, click
Install on the Welcome
screen.
C
Read the License Agreement,
and click Next to continue the
installation. If you click Cancel,
you will end the installation.
D
The Wireless Mode screen will
C
appear. Click the
Infrastructure Mode radio
button if you want your wireless
computers to communicate
with your wired network using a
wireless access point. Click the
Ad-Hoc Mode radio button if
you want multiple wireless
computers to network directly
with each other.
D
In the SSID field, enter the SSID
of your wireless network. The
SSID is the network name and
must be identical for all
devices in the network. The
default setting is linksys (all
lowercase).
Then click Next.
E
If you chose Infrastructure
Mode, go to Step F now.
If you chose Ad-Hoc Mode,
select the correct operating
channel for your network from
the Channel drop-down menu.
The channel you choose
should match the channel set
on the other devices in your
wireless network.
Select the Network Mode from E
the drop-down menu. Keep
the default setting, Mixed
Mode, if you have Wireless-G
and Wireless-B devices in your
network. Select G-Only Mode if
you have only Wireless-G
devices in your network.
Then click Next.