Samsung UN32J4000 User Manual page 2

x If the TV has no input during the time period set in Auto y Supported Video Formats
Protection Time, the Screen saver will run.
x
The power-saving mode of some external hard disk drives may
File
Container Video Codec Resolution
be released automatically when your connect them to the TV.
Extension
x If you use a USB extension cable, the TV may not recognize the
USB device or may not be able to read the files on the device.
Motion JPEG 640x480
x If a USB device connected to the TV is not recognized, the list of
files on the device is corrupted, or a file in the list is not played,
H.264 BP/
connect the USB device to a PC, format the device, and check the
MP/HP
connection.
*.avi
x
If a file you deleted from the PC is still found when you run Media
H. 264 BP /
*.mkv
Play, use the "Empty the Recycle Bin" function on the PC to MP / HP
*.asf
permanently delete the file.
*.wmv AVI
x Photos only supports the sequential jpeg format.
*.mp4 MKV
Divx 3.11 / 4
x The Videos option does not support the scene search and
/ 5 / 6
*.mov ASF
thumbnail functions.
*.3gp MP4
x
If the number of files and folders saved on a USB storage device
*.3gpp 3GP MPEG4 SP/
is over approximately 4000, the files and folders may not appear
*.mpg MOV ASP
and some folders may not open. 1920x1080
*.mpeg FLV
x The maximum displayed number of files, including sub folders, in Window
VRO
*.ts
Media Video
one folder of a USB storage device is 1000.
*.tp VOB v9(VC1)
x The media may not play smoothly if you use a USB device rated
*.trp PS
lower than USB 2.0.
*.mov TS
*.flv
Videos MPEG2
*.divx
*.dat
►
Movie 01.avi 00:04:03 / 00:07:38 1/1
MPEG1
*.webm WebM VP8 1920x1080
Other Restrictions
y Codecs may not function properly if there is a problem with the
content.
E Pause L Jump T Tools R Return
SUM y Video content will not play or will not play correctly if there is an
1. In the Media Play menu, press the ◀ or ▶ button to select error in the content or container.
Videos, and then press the ENTERE button.
y Sound or video may not work if they have bit rates/frame rates
2. Press the ◀/▶/▲/▼ buttons to select a video in the file list. above the TV's compatibility ratings.
3. Press the ENTERE button or (Play) button.
∂ y If the Index Table contains an error, the Seek (Jump) function
-
will not work.
The file name is displayed on the top of the screen with
the playing time.
y When the TV is playing video over a network connection, the
-
If video time information is unknown, playing time and video may not play smoothly because of data transmission
speeds.
the progress bar are not displayed.
- y Some USB/digital camera devices may not be compatible with
During video playback, you can search using the ◀ and ▶
buttons. the TV.
✎ In this mode, you can play movie clips contained in a game, y When the TV is playing a video at a bit rate of 10 Mbps or higher,
the menu screens may be displayed slowly.
but you cannot play the game itself.
y Supported Subtitle Formats Video Decoder
-
External Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 / AP L4 are not supported.
Name File extension
MPEG-4 timed text .ttxt GMC 2 or above is not supported.
SAMI .smi
Audio Decoder
SubRip .srt
WMA 10 Pro supports up to 5.1 channels. Supports up to the M2
SubViewer .sub
profile. WMA lossless audio is not supported.
Micro DVD .sub or .txt
QCELP and AMR NB/WB are not supported.
SubStation Alpha .ssa
Vorbis is supported for up to 2 channels.
Advanced SubStation Alpha .ass
Dolby Digital Plus is supported for up to 5.1 channels.
-
Internal
The DTS LBR codec is only available for MKV / MP4 /TS
Name Container Format containers.
Xsub AVI Picture Format
SubStation Alpha MKV Text Format
Advanced SubStation Alpha MKV Text Format
SubRip MKV Text Format
MPEG-4 Timed text MP4 Text Format
- 9 -
Trouble Powering On Before you turn the TV on, find the red light on the right or left bottom of your TV. Press the power on button on
the TV or remote and the light should blink about 5 times before the TV turns on.
If you find that you are having trouble powering on your Samsung television, there are a number of things to check
before making a call to the service department.
y If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you
press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your
keyboard or move the mouse. Then try turning your TV on.
If you're sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If
you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting
a signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or
satellite box remote control. If the screen displays the guide or info data, the problem is caused by the box.
Stand Assembly • If you have any trouble assembling the stand, refer to "Install the Stand" in the Start Up or Stand Installation
Guide.
Cannot find a channel • Re-run Plug & Play or run Auto Program. (go to MENU - Channel - Auto Program)
Poor Picture First, perform the Picture Test and to see if your TV is displaying the test image properly.
Go to MENU - Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as good as • If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to
it did in the store. deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD channels from the channel line up.
• Air/Cable Antenna connection: Try HD channels after running Auto Program.
✎
Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality of up
scaled SD content is low.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
The picture is distorted has macroblock • Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in
error, small block, dots, pixelization. sports and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
The color is wrong or missing. • If you're using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness. • Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
• Adjust the Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )
• Try resetting the picture to the default picture settings. (go to MENU - Picture - Picture Reset)
There is a dotted line on the edge of • If the picture size is set to Screen Fit, change it to 16:9.
the screen.
• Change the cable/satellite box resolution.
The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input
1 on the TV.
When changing channels, the picture • If the TV is connected to a cable box, reset the cable box. (Disconnect and then reconnect the box's AC cord, and
freezes or is distorted or delayed. then wait until the cable box reboots. It may take up to 20 minutes.)
• Set the output resolution of the cable box to 1080i or 720p.
Sound Problems Perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may be caused by the source or signal.
There is no sound or the sound is too • Check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.
low at maximum volume.
The picture is good, but there is no • If you are using an external device, check the device's audio output option Ex. you may need to change your
sound. cable box's audio option to HDMI if the box is connected to your TV using an HDMI cable.
• Reboot the connected device by reconnecting the device's power cable.
The speakers are making an • Check the cable connections. Make sure a video cable is not connected to an audio input.
inappropriate noise. • For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
• Perform the Sound Test as explained above.
No Picture, No Video
The TV will not turn on. • Make sure the AC power cord is securely plugged into the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote.
If the TV turns on, refer to 'Remote control does not work' below.
The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Time menu.
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged securely into the wall outlet and the TV.
• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes
if there is no signal.
- 13 -
Music Playing Multiple Files
■ Playing selected video/music/photo files
Frame Bit rate Audio
I Love You. mp3 1. On the File List screen, highlight a file, and then press the
rate(fps) (Mbps) Codec Playlist 3/15
1st Album I Love you
Yellow button on your remote.
Pop Jhon
2010
Music 1
4.2MB
No Singer 2. Repeat Step 1 to select multiple files.
8
Music 2
No Singer
✎
NOTE
Music 3
No Singer
Music 4 x A c mark appears to the left of the selected files.
01:10 / 04:02
No Singer
Music 5 x To cancel a selection, press the Yellow button again.
No Singer
x
Dolby To deselect all selected files, press the
E Pause L Jump T Tools R Return
Digital USB
Deselect All, and then the ENTERE button.
LPCM
1. In the Media Play menu, press the ◀ or ▶ button to select
3. Press the
ADPCM
(IMA, MS) Music, and then press the ENTERE button.
then press the ENTERE button.
AAC
2. Press the ◀/▶/▲/▼ buttons to select the desired Music in the ■ Playing a video/music/photo folder
HE-AAC
file list.
MAX 30 1. With the folders on your USB device displayed, use the
WMA
30 Dolby ◀/▶/▲/▼ buttons to highlight a folder.
3. Press the ENTERE button or (Play) button.
∂
Digital
✎ During music playback, you can search using the ◀ and 2. Press the
Plus
MPEG(MP3) ▶ button.
ENTERE
DTS (Core ,
✎ � (REW) and µ (FF) buttons do not function during
Media Play - Additional Functions
LBR)
play.
G.711(A-
■ Videos/Music/Photos Play Option menus
Law, μ-Law) ✎ Media Play only displays files with an MP3 or PCM file
When playing a file, press the
extension. Other file extensions are not displayed, even if
they are saved on the same USB device.
Category
✎ If the sound is abnormal when the TV plays MP3 files, adjust
the Equalizer in the Sound menu. (An over-modulated MP3
Title
6~30 20 Vorbis file may cause a sound problem.)
Repeat Mode
Photos
Picture Size
Normal
Image1024.jpg 1024x768 2010/2/1 3/15
Picture Mode
Sound Mode
Subtitle
Settings
Audio Format You can select the digital audio
E Pause L Previous/Next T Tools R Return
1. In the Media Play menu, press the ◀ or ▶ button to select SUM
Audio
Photos, then press the ENTERE button.
Language
2. Press the ◀/▶/▲/▼ buttons to select a photo in the file list.
Stop Slide
3. Press the ENTERE button or ∂ (Play) button. Show /
✎ NOTE Start Slide
Show
x
While a photo list is displayed, press the ∂ (Play) / ENTERE
Slide Show
button on the remote control to start a slide show.
Speed
x All files in the file list section will be displayed in the slide
show.
Background
x During the slide show, files are displayed in order. Music
x
During the slide show, you can adjust the slide show speed
using (π) (REW) or (µ) (FF) button. Zoom
x
You can move to other files using ◀ or ▶ button.
✎ Rotate
Media Play can play Music files automatically during a Slide
Show if Background Music is set to On.
Information
✎ You cannot change the Mode in Background Music until the
Background Music file has finished loading.
y Supported Photo Formats
Image Photo Resolution
Base-line 15360 x 8640
JPEG
Progressive 1024 x 768
Other Restrictions
y CMYK, YCCK Color space JPEG are not supported.
- 10 -
There is no picture/video. • Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
• Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV
input. For example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the correct input source by pressing the
• Reboot the connected device by unplugging and then reconnecting the device's power cable.
RF (Cable/Antenna) Connection
The TV is not receiving all channels. • Make sure the coaxial cable is connected securely.
• Run Auto Program to add available channels to the channel list.
Go to MENU - Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set in
the menu. There are 3 options. (STD, HRC and IRC)
• Verify the antenna is positioned correctly.
No Caption on digital channels. • Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1.
• Some channels may not have caption data.
The picture is distorted: macroblock, • Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in
error, small block, dots, pixelization. sports and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
Others
Purple/green rolling horizontal bars • Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the
and buzzing noise from the TV speakers set-top-box has a grounding issue. Replace the Component video cables with an HDMI connection.
with Component cable connection.
The picture will not display in full • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
screen.
• Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on
the TV.
• Adjust the picture size option on your external device or change the TV to full screen.
The remote control does not work. • Replace the remote control's batteries. Make sure you insert them with the polarity (+/–) correct .
• Clean the transmission window located on the top of the remote control.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control • Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for
does not turn the TV on or off, or adjust the SAMSUNG TV code.
the volume.
A "Mode Not Supported" message • Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to
appears. resolution settings in this manual.
Caption on the TV menu is greyed out. • You cannot select Caption in the TV menu when watching content from a device connected via HDMI or
Component.
• Caption must be activated on the external device.
There is a plastic smell from the TV. • This smell is normal and will dissipate in a few days.
TV Signal Strength is unavailable in the • This function is only available for digital channels received through an Antenna / RF/Coax connection.
Self Diagnosis Test menu.
TV is tilted to the right or left side. • Remove the stand base from the TV and reassemble it.
The Channel menu is grey out • The Channel menu is only available when you select the TV source.
(unavailable).
Your settings are lost after 30 minutes • If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from
or every time the TV is turned off. Store Demo mode to Home Use mode using the Plug & Play procedure. Press the
mode, go to MENU → Setup → Plug & Play → ENTERE.
You have intermittent loss of audio • Check the cable connections and reconnect them.
or video.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree
connectors.
You see small particles when you look • This is part of the product's design and is not a defect.
closely at the edge of the frame of
the TV.
POP (TV's internal banner ad) appears • Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).
on the screen.
✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there
may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
✎ You can watch detailed troubleshooting videos at www.samsung.com/spsn.
✎ Some functions and pictures shown in this manual are available on specific models only.
✎ You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com
→ Support → Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick,
insert the USB memory stick into the TV's USB slot, and then select Support > Software Upgrade in the TV's menu.
- 14-
Settings
Using the Setup Menu
■ DivX® Video On Demand: Shows the registration code
authorized for the TV. If you connect to the DivX web site and
register with the 10-digit registration code, you can download
the VOD activation file. Once you play it using Media Play, the
registration is completed.
✎ For more information on DivX® VOD, visit "http://vod.
divx.com".
TOOLS button, select
■ Information : Select to view information about the connected
USB device.
TOOLS button, select Play Selected Contents, and
❑ Using Sports Mode t
This mode provides optimized conditions for watching soccer and
other sports.
TOOLS button, select Play Folder, and then press the y A (Zoom): Pauses playback and divides the picture into 9 parts.
Select a part to zoom it in.
.
button
✎ When Sports Mode is On, the picture and sound modes are
set to Stadium automatically.
✎ If you turn the TV off while Sports Mode is on, Sports Mode
TOOLS button.
is turned off.
Operation Videos Music Photos
Support Menu
You can select another video file
c
to play directly.
Self Diagnosis
You can play movie and music
c c
files repeatedly.
■ Picture Test: Use to check for picture problems. If the problem
You can adjust the picture size to
appears in the test picture, select Yes and follow the directions
c
your preference.
on the screen.
You can adjust the picture
c c ■ Sound Test: Use the built-in melody sound to check for sound
setting.
problems. If the problem occurs during the test, select Yes and
You can adjust the sound setting.
c c c
follow the directions on the screen.
You can play the video with
■ Signal Strength: (Digital channels only) An HD channel's
Subtitles. This function only
c reception quality is either perfect or the channels are
works if the subtitles have the
same file name as the video. unavailable. Adjust your antenna to increase signal strength.
■ Reset: Reset all settings to the factory defaults.
c
output format.
✎ The PIN input screen appears before the setup screen.
You can change the audio
✎ Enter your 4-digit PIN. Change the PIN using the Change
language if the video has more c
PIN option.
than one language.
Software Upgrade
You can start or stop a Slide
c Software Upgrade can be performed by downloading the latest
Show.
firmware from samsung.com to a USB memory device.
You can select the slide show
Use Mode
c
speed during the slide show.
You can turn the TV into a display model for retail environments by
You can set and select
background music when
c setting Use Mode to Store Demo.
watching a Slide Show.
✎ For all other uses, select Home Use.
You can zoom into images in full
c
screen mode. ✎ With Store Demo, some functions are disabled, and the TV
automatically resets itself after a preset amount of time.
You can rotate images in full
c
screen mode.
HD Connection Guide
You can see detailed information
c c c
about the played file.
Refer to this information when connecting external devices to
the TV.
Contact Samsung
View this information when your TV does not work properly or
when you want to upgrade the software. You can find information
regarding our call centers and how to download products and
software.
Storage and Maintenance
✎ If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching
the TV.
✎ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully
SOURCE button on the remote control.
using a soft cloth to prevent scratches.
Do not spray water directly onto the
product. Any liquid that goes into the
product may cause a failure, fire, or
electric shock.
License
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the
DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 8,656,183; 8,731,369;
RE45,052.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS,
the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark
of DTS, Inc. © DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, DTS in combination with the Symbol, and DTS Studio Sound are registered trademarks or
trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
Open Source License Notice
Open Source used in this product can be found on the following webpage.
(http://opensource.samsung.com) Open Source License Notice is written only English.
SOURCE button to select TV
Securing the TV to the Wall
Other Information
Installing the Wall Mount Kit Caution: Pulling, pushing, or climbing onto the TV
may cause the TV to fall. In particular, ensure that
The wall mount kit (sold separately) allows you to mount the TV
your children do not hang over or destabilize the TV;
on the wall.
doing so may cause the TV to tip over, resulting in
For detailed information about installing the wall mount, see
serious injuries or death. Follow all safety precautions
the instructions provided with the wall mount items. Contact a
provided on the included Safety Flyer. For added
technician for assistance when installing the wall mount bracket.
stability, install the anti-fall device for safety
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the purposes, as follows.
wall mount on your own.
To prevent the TV from falling
Wall mount ✎ Since the necessary brackets, screws, and string or cable are
TV
bracket not supplied, please purchase these separately.
Wall
mount
1. Insert the screws into the wall brackets and firmly fasten them to
Adapter
the wall. Make sure the screws are firmly fixed to the wall.
✎ We strongly recommend you drive the screws into a stud.
C
2. Using screws, insert the screws through the TV brackets, and
Wall Mount Kit Specifications (VESA) then fasten the screws to the top VESA screw holes on the back
of the TV.
✎
The wall mount kit is not supplied, but sold separately.
3. Connect the brackets on the TV and the brackets on the wall with
Install your wall mount on a solid wall perpendicular to the floor.
a strong string or cable, and then tie the string or cable tightly to
When attaching to other building materials, please contact your
the brackets.
nearest dealer. If you install the TV on a ceiling or slanted wall, it
✎ Verify all connections are properly secured. Periodically check
may fall and result in severe personal injury.
the connections for any sign of fatigue or failure. If you have
✎
NOTE any doubt about the security of your connections, contact a
professional installer.
x Standard dimensions for wall mount kits are shown in the
table below. ✎ Install the TV close to the wall so that it does not fall.
x When purchasing our wall mount kit, a detailed installation ✎ Connect the string or cable so that the brackets on the wall
manual and all parts necessary for assembly are provided. are at the same height or lower than the brackets on the TV.
x Untie the string or cable before moving the TV.
Do not use screws that do not comply with the VESA standard
screw specifications. ✎ To purchase a TV Holder kit, contact Samsung customer care
x
Do not use screws that are longer than the standard dimension
or do not comply with the VESA standard screw specifications.
Troubleshooting
Screws that are too long may cause damage to the inside of
the TV set.
If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply,
x For wall mounts that do not comply with the VESA standard
visit samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
Problem
x
Do not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Flickering and Dimming
Samsung is not liable for these kinds of accidents.
x Samsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
x Component Connections /
Do not mount the TV at more than a 15 degree tilt.
x Screen Color
Always have two people mount the TV on a wall.
VESA screw hole
Product TV size in Standard
specs (A * B) in C (mm) Quantity
Family inches Screw
millimeters
LED-TV 32 200 X 200 31.3 ~ 32.3 M8 4
Do not install your Wall Mount Kit
while your TV is turned on. It may Screen Brightness
result in personal injury due to
electric shock.
Unwanted Powering off
- 11 -
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Clean the product with a soft cloth
Model Name
dampened with in a small amount of
water. Do not use a flammable liquid
Display Resolution
(e.g. benzene, thinners) or a cleaning
Screen Size
agent.
(Diagonal)
Sound
Output
Dimensions (W x H x D)
Body
With stand
Weight
Without Stand
With Stand
✎ Design and specifications are subject to change without prior notice.
✎ This device is a Class B digital apparatus.
✎ For information about the power required and more about power consumption, refer to the label attached to the product.
✎ Typical power consumption is measured according to Energy Star Program requirements for televisions.
✎ Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.
samsung.com/recyclingdirect or call, (877) 278-0799.
■ JACK PANEL DETAIL / REAR VIEW
Model name
UN32J4000/UN32J400D
UN32J5003
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions
prior to performing installation of your TV. Not responsible for typographical or printed errors.
© 2016 Samsung Electronics America, Inc
- 15 -
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used
to physically fix the system when using it in a public place. Refer
to the manual provided with the Kensington Lock for additional
information on proper use.
✎
Please find a "K" icon on the rear of the TV. The Kensington
slot is beside the "K" icon.
✎ The position and color may differ depending on the model
Display Modes (HDMI/DVI Input)
Optimal resolution: 4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60Hz
Horizontal Vertical Pixel Clock Sync
1366 x 1920 x
Mode Resolution Frequency Frequency Frequency Polarity
768 1080
(KHz) (Hz) (MHz) (H / V)
640 x 350 31.469 70.086 25.175 +/- c c
IBM
720 x 400 31.469 70.087 28.322 -/+ c c
640 x 480 35.000 66.667 30.240 -/- c c
MAC 832 x 624 49.726 74.551 57.284 -/- c c
1152 x 870 68.681 75.062 100.000 -/-
c
640 x 480 31.469 59.940 25.175 -/- c c
640 x 480 37.861 72.809 31.500 -/-
c c
640 x 480 37.500 75.000 31.500 -/- c c
800 x 600 37.879 60.317 40.000 +/+ c c
800 x 600 48.077 72.188 50.000 +/+ c c
800 x 600 46.875 75.000 49.500 +/+ c c
1024 x 768 48.363 60.004 65.000 -/-
c c
1024 x 768 56.476 70.069 75.000 -/- c c
1024 x 768 60.023 75.029 78.750 +/+
c c
VESA DMT 1152 x 864 67.500 75.000 108.000 +/+ c
1280 x 720 45.000 60.000 74.250 +/+ c c
1280 x 800 49.702 59.810 83.500 -/+ c
1280 x 1024 63.981 60.020 108.000 +/+ c
1280 x 1024 79.976 75.025 135.000 +/+ c
1366 x 768 47.712 59.790 85.500 +/+ c c
1440 x 900 55.935 59.887 106.500 -/+
c
1600 x 900RB 60.000 60.000 108.000 +/+ c
1680 x 1050 65.290 59.954 146.250 -/+
c
1920 x 1080 67.500 60.000 148.500 +/+ c
Possible Solution
If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy
efficiency features such as the Energy Saving feature. Follow the steps below with your remote to turn these
features off or on.
y Energy saving : MENU → Setup → Eco Solution → Energy Saving → Select Settings
If you find that the color on your Samsung television's screen is not correct or black and white, first run a Self
Diagnosis Test on the TV to make sure there are no device issues.
y Self Diagnosis : User Menu → Support → Self Diagnosis → Picture Test
y If the test is ok, try making sure ;
y Your connections are all consistent. For example, if you've used the AV In jack on your TV, make sure you have
used the AV Out jack on your video source.
y Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled
Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video
source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV, etc.
If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some
settings you should check before calling for a repair.
y Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go to "Picture" in the Menu, and then try
adjusting these options.
If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco
friendly No Signal Power Off feature.
First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the TV still on
knowing that it will turn off after a certain period of time and not waste energy.
y Sleep Timer : User Menu → Setup → Time → Sleep Timer
If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.
y No Signal Power Off : User Menu → Setup → Eco Solution → No Signal Power
y Auto Power Off : User Menu → Setup → Eco Solution → Auto Power Off
- 12 -
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C )
5% to 95%, non-condensing
UN32J4000/UN32J400D UN32J5003
1366 x 768 1920 x 1080
32" Class 32" Class
(31.5" measured diagonally) (31.5" measured diagonally)
10 W
29.3 x 17.4 x 2.7 inches 29.1 x 17.1 x 2.7 inches
(745.4 x 442.2 x 69.0 mm) (741.0 x 436.0 x 69.0 mm)
29.3 x 18.2 x 5.9 inches 29.1 x 18.4 x 5.7 inches
(745.4 x 463.1 x 150.5 mm) (741.0 x 468.7 x 145.5 mm)
8.1 lbs (3.7 kg) 8.3 lbs (3.8 kg)
8.3 lbs (3.8 kg) 8.5 lbs (3.9 kg)
1
2
4
5
3
(Unit: inches)
1 2 3 4 5
4.5 10.7 4.7 8.0 6.6
4.2 10.6 4.7 7.9 6.4
- 16 -