Advertisement
A
D
B
A - ON or OFF Functions Buttons, 3 Channels per code Adjustment
B - Code Adjustment (A,B,C or D)
C - Socket LED Indicator
D - All ON or all OFF Function Buttons
E - UK Mains Socket - 1000w maxium
On opening the pack, remove the battery tab protecting the battery inside the remote control.
PAIRING CONTROLLER & FIRST SOCKET
1. Connect the socket to the power, the LED will start blinking. The receiver has entered into learning mode.
2. Now chose the remote channel and buttons which you want to control the socket, press the On button
you have chosen for around 5 seconds. The LED will become static to identify the socket is now paired.
3. You can now use the remote to turn on or turn off the socket.
NOTE: when the Socket connects to the power, the LED only blinks for around 15s, if you cannot pair the
remote within 15s, the socket will quit learning status and then LED goes static.
PAIRING CONTROLLER & MORE SOCKETS
1. After you paired the first socket, you can press the first learned button ON and OFF together for around
5 seconds.
2. The socket LED will blink and enter into learning mode.
3. Then press another ON button to learn the remote for that additional socket.
4. You can repeat this step finish learning all sockets or combinations.
NOTE: you can totally learn 12 channels for the remote. If you try to learn more than 12 channels, the
learned code will lose randomly.
LOCATION OF CONTROLS
HOW TO USE
C
E
Advertisement
