1. Manuals
  2. Brands
  3. Stahl-electronics Manuals
  4. Switch
  5. HS-500
  6. User manual

Stahl-electronics HS-500 User Manual

Low noise high voltage switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HS-500
Low Noise High Voltage Switch
HS-500_User_Manual_1_41.doc
18 - January 2018
Data Sheet & User Manual
Model Number HS-500 Rev. 1.41

Typical Applications:

● piezo elements
● beam line electrodes / ion optics
● ion traps
Features:
● fast low noise switches (SPDT style)
● max. 500V switching voltage with TTL/CMOS level control
● 35ns intrinsic rise/fall time
www.stahl-electronics.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HS-500 and is the answer not in the manual?

Questions and answers

Related Manuals for Stahl-electronics HS-500

Summary of Contents for Stahl-electronics HS-500

  • Page 1: Typical Applications

    HS-500 Low Noise High Voltage Switch HS-500_User_Manual_1_41.doc 18 - January 2018 Data Sheet & User Manual Model Number HS-500 Rev. 1.41 Typical Applications: ● piezo elements ● beam line electrodes / ion optics ● ion traps Features: ● fast low noise switches (SPDT style) ●...

  • Page 2: Table Of Contents

    3. Installation ……………………………………………………………………..… Mechanical and Electrical Installation……………………………… 4. Operation and Control Elements ……………………………………………….. Elements on the front plate………………………………………… Elements on the rear side..………………………………………… Output Characteristics……………………………………………… 5. Maintenance………………………………………….…………………………. 6. Specifications……………………………………………………………………. Declaration of Conformity………………………………………………………………. 12 www.stahl-electronics.com phone: +49 6242-597-2140, fax: +49 6242 504884...

  • Page 3: Safety Hints

    No outdoor operation Outdoor operation of the device is not admissible. www.stahl-electronics.com phone: +49 6242-597-2140, fax: +49 6242 504884...

  • Page 4: General Information And Overview

    MOSFET-transistors, allowing fast switching transitions in the order of 100ns and less. fig 2.2: Block diagram of a HS-200/HS-500 device. Inside the DUAL version, the scheme exists twice, i.e. there are two independent switches.

  • Page 5: Device Variety

    SHV connectors. Voltages are referenced to case ground. Note : span is the maximum voltage difference between positive and negative inputs A and B. www.stahl-electronics.com phone: +49 6242-597-2140, fax: +49 6242 504884...

  • Page 6: Installation

    Please note that wiring may only be done when the device is turned off. Connecting a powered- up output to external circuitry can easily cause sparks and electrical discharges. The resulting overvoltages can severely and permanently damage the device itself and also external circuitry. www.stahl-electronics.com phone: +49 6242-597-2140, fax: +49 6242 504884...

  • Page 7: Operation And Control Elements

    B. This is indicated by the plus and minus sign “+” and “-“. In general, both input voltages may reside in the range between -500V and +500V versus GND, but their difference should not www.stahl-electronics.com phone: +49 6242-597-2140, fax: +49 6242 504884...

  • Page 8: Output Characteristics

    (right frame) negative step of 200V with small capacitive load (C=17pF); transient rise time (10% to 90% of voltage step size) is in the order of 45ns in each case. The green trace shows the input trigger signal. www.stahl-electronics.com phone: +49 6242-597-2140, fax: +49 6242 504884...
  • Page 9 In case of low-frequency or static operation, the ‘on’-state serial resistance of input A or B to OUT amounts to approx 190 Ohms, and increases to larger 10 MOhm in the ‘off’ state. www.stahl-electronics.com phone: +49 6242-597-2140, fax: +49 6242 504884...

  • Page 10: Maintenance

    = DC to 10MHz admissible DC current 140mA continuous current admissible pulsed current 1.7A t < 1.5ms, repetition rate <= 2 Hz internal current limit, 1.1A 1.7A t < 700µs shortly at switching instant www.stahl-electronics.com phone: +49 6242-597-2140, fax: +49 6242 504884...
  • Page 11 1.2kg Note *): Inputs A and B feature 1 G resistors to ground for protection against parasitic charge up. Currents through these protection resistors add to the numbers mentioned above. www.stahl-electronics.com phone: +49 6242-597-2140, fax: +49 6242 504884...

  • Page 12: Declaration Of Conformity

    The product herewith complies with the requirements of the: 1. Low Voltage Directive 73/73EEC; 2. EMC Directive 89/336/EEC (including 93/68/EEC) and carries the CE Marking accordingly Mettenheim, 25. Jan. 2017, Dr. Stefan Stahl, CEO www.stahl-electronics.com phone: +49 6242-597-2140, fax: +49 6242 504884...

Table of Contents