Grasslin QEG-1 Operating Manual

The time on the programmer must be correct. Some types have to be
adjusted in spring and autumn at the changes between Greenwich
Mean Time and British Summer Time.
You may be able to temporarily adjust the heating programme, for
QEG-1
example, 'Override', 'advance', or 'Boost'. These are explained in the
QEG-1S manufacturer's instructions.
The heating will not work if the room thermostat has switched the
EN Operating Manual
heating off. and, if you have a hot-water cylinder, the water heating
will not work if the cylinder thermostat detects that the hot water has
reached the correct temperature.
Override
Thu
07 / 02 / 2013
Extra Hour
am

Description of the device

OFF Your single channel timeswitch provides timing control for your central
AUTO Mode
ONCE
heating, letting you set ON and OFF periods to suit your own lifestyle.
CONT
EXT HOUR
ON1 +1 • Backlit lcD Display
+2
+3
• Real Time clock
• Up to 3 ON/OFF per day
Holidays • automatic summertime / wintertime changeover
DAY/ PROG RUN
TIME
OK
• Daily, weekly
• Different running modes: OFF, aUTO, ONcE, cONTINUOUS and
Select
hOlIDaYS
1)
• Manual override function
• Manual extra hour function
• 3 different pre-programmed profi les, customizable by user
• Boiler service interval indication & actions
Grässlin GmbH

Designated use

• The programmer is used to control central heating zone systems or
Bundesstraße 36
combi boilers
D-78112 St. Georgen
• Suitable for use in dry rooms only!
Germany
• Do not install in the vicinity of devices which generate inductive
Phone: +49 7724 933-0
discharges (motors, transformers, etc.)
Fax: +49 7724 933-240
www.graesslin.de
info@graesslin.de

Technical data

Dimensions h x W x D (mm)
Weight g (approx.)
Power supply
Power consumption
Power reserve
More information on our web page:
Switching capacity
http://qeg.graesslin.de/qrcode/im/qeg1/
Time display
Time setting resolution
– Time of day
– Programmes / min. switching
Programmes
Number of switchings per day
Operating temperature range

Safety Instructions

ambient temperature
humidity range
Danger! Risk of electric shock! accuracy
Terminal capacity
Installation must be carried out by a
Z Z
Protection type
WARNING
professional electrician!
European standards
• To avoid injuries, the device must be installed by a skilled
electrician only!
• Before changing the battery, the device must be disconnected
from the power supply!
• Please observe the national regulations and safety instructions.
• Interferences and changes to the device will invalidate the
warranty and guarantee rights.
• Maximum diameter of the conductors lines for the
2 Installation und Montage

Installation and mounting

terminals: 2 x 2,5 mm
Read and observe these instructions to guarantee a perfect function
of the device and a safe operation.
WARNING
General information
Information about the device
What is a programmer?
...an Explanation for householders (as recommended by the Energy
Savings Trust)
Programmers allow you to set 'ON' and 'OFF' time periods. Some
models switch the central heating and domestic hot water on and
off at the same time, while others allow the domestic hot water and
heating to come on and go off at different times.
Set the 'ON' and 'OFF' time periods to suit your own lifestyle. On
some programmers you must also set whether you want the heating
and hot water to run continuously, run under the chosen 'ON' and
'OFF' heating periods, or be permanently off.
1) Function not available for all products.
80.10.1351.7_manual_QEG1_QEG1S_FERTIG_V02.indd 1
Open/Close housing, Wall mounting
1) and week-weekend 1) programming possibility
Wiring diagram
1)
N
L
95 x 148 x 36
285
230 V AC / 50-60 Hz
Quick-start guide – 3 clicks to total control
< 3 W
> 2h
3 a 250 V ~ resistive, cos φ = 1 1. connect mains power.
3 a 250 V ~ inductive, cos φ = 0.6
2. Press OK three times.
24 h or 12 h aM/PM format Z Z The default Standard in-built programme runs.
You can control the QEG with the Override, Extra hour or Mode
Z Z
buttons.
1 min.
1 min.
Selectable (daily , weekly, or Please read the full instructions if you want to know more.
week-weekend)
3 ON/OFF pairs
(2 ON/OFF pairs selectable)
Operation and confi guration
0°c ... + 45°c
-20°c ... + 55°c
10 to 90% Rh, non condensing Display / Function keys
Type ± 1 sec./day at +20°c
2 x 2,5 mm 2
IP 30
EN60730-2-7
07 / 02 / 2013
compliant with building regulations
(Part l Uk) (Part J Scotland)
1)
1)
Holidays
OK
Danger! Risk of electric shock!
Day of the week indicator
A
Z Z Installation must be carried out by a
current day, month, year
B
professional electrician!
C central heating operating
mode indicator
D central heating override
button
central heating extra hour
E
button
F central heating operating
mode button
G central heating indicator lamp
H central heating extra hour
1.5 m
indication
Commissioning
When fi rst using the timer, you have to set programming type,
date and time.
PROG TYPE
DAY
MONTH
YEAR
HOUR
MINUTE
DONE
1. connect the programmer to power.
Z Z Product name and version number are displayed briefl y.
Z Z The preset PROGRAMMING TYPE and OK are fl ashing.
Depending on the product you can choose between three different
settings: Daily, Weekly or Week-Weekend
1)
Daily all days (Monday - Sunday) are programmed
with the same ON/OFF time schedule
N L 1 2 3 4
Weekly You can program each day (Monday, Tuesday,
1)
...) with a different ON/OFF time schedule
Week-Weekend 1) You can program Monday - Friday with a ON/
OFF ON
OFF time schedule and Saturday - Sunday with
output
Mains
a different one.
input
2. choose your desired programming type (DaIlY, WEEklY
WEEk-WEEkEND ), or , and confi rm with
1)
Z Z Preset value DATE is fl ashing.
3. Enter day, or , and confi rm with .
Z Z Preset value MONTH is fl ashing.
4. Enter month, or , and confi rm with
Preset value YEAR is fl ashing.
Z Z
5. Enter year, or , and confi rm with .
Z Z Preset TIME is fl ashing.
6. Enter hour, or , and confi rm with .
Z Z Preset value MINUTE is fl ashing.
7. Enter minute, or , and confi rm with
The date and time are saved.
Z Z
The programmer goes to RUN mode.
Z Z

Set date and time

If you wish to change the date or time, follow the instructions below:
DAY/ PROG RUN
TIME
DAY
Override
Thu
MONTH
am Extra Hour
YEAR
OFF
AUTO Mode
HOUR
ONCE
CONT
EXT HOUR
MINUTE
ON1 +1
+2
+3 HOT WATER HEATING
Override DONE Override
Thu
07 / 02 / 2013
Extra Hour am Extra Hour
OFF
DAY/ PROG RUN OFF
Mode AUTO AUTO Mode
TIME
ONCE ONCE
CONT CONT
EXT HOUR EXT HOUR
ON1 +1 ON1 +1
+2 +2
+3 +3
Select
Holidays
DAY/ DHW CH RUN
TIME
OK
1. Press the SELECT until menu DAY/TIME is selected.
Select
central heating programming Select indicator lamp DAY/TIME is ON.
I Z Z
period indication 2. Enter day, or , and confi rm with .
Preset value MONTH is fl ashing.
J Select indicator lamps Z Z
K Select 3. Enter month, or , and confi rm with
L Ok button Z Z Preset value YEAR is fl ashing.
M "-" and "+" button 4. Enter year, or , and confi rm with .
HOT WATER HEATING
Override Override
holiday button Preset TIME is displayed. Thu
N 1) Z Z 07 / 02 / 2013
Extra Hour am Extra Hour
holiday icon 5. Enter hour, or , and confi rm with .
O 1)
OFF OFF
Mode Mode
AUTO AUTO
Preset value MINUTE is fl ashing. ONCE ONCE
P Information text line Z Z
CONT CONT
ON1 EXT HOUR +1 EXT HOUR
+2 ON1 +2 +1
+3 +3
Q analog clock / 6. Enter minute, or , and confi rm with
current time Z Z The date and time are saved.
Holidays DAY/ DHW CH RUN
TIME
OK
R Warning icon 7. Press the SELECT until indicator lamp RUN is ON.
Select
Change AM/PM time display to 24 hour clock
Your programmer can operate on the 12 hour aM/PM or 24 hour clock
formats.
If you wish to change the clock format, follow the instructions below:
10 sec.
INST MENU
DIGI CLOCK
12 24 HRS
1. Make sure the device is working in RUN mode.
2. Press and hold buttons at the same time for 10 seconds.
Z Z INST MENU opens and OK is fl ashing.
3. Confi rm with .
The menu item DIGI CLOCK is displayed.
Z Z
4. Press to edit settings.
Z Z Setting NO is fl ashing.
5. Press or to scroll through the menu. choose YES and
confi rm with .
. Setting AM PM is fl ashing.
1) Z Z
6. Press or to scroll through the menu. choose AM PM or 24
HRS and confi rm with .
Z Z The chosen setting is saved.
Z Z The next menu item BACKLIGHT is displayed.
7. To save your settings, continue scrolling through the menu options
with key, until you once again see INST MENU / – OK +, and
fi nally leave the installers menu with key.
With QEG-1S, continue scrolling through the menu options with
key, until you see CHANGE PIN / – OK +, and fi nally leave the
Installers Menu with key.
,
1)
.

Running a built-in programme (default programmes)

With the date and time correct, your timer will now be operating to the
built-in programmes. These have been designed to provide heating at
typical times throughout the day.
. The built-in programmes give you a starting point that you can
personalise to your own requirements, please see the section "Review/
Edit central heating program" or "Review/Edit domestic hot water
program".
Built-in programme STD (DEFaUlT)
.
Daily ON1: 06:30 am ON2: 12:00 pm* ON3: 04:30 pm
OFF1: 08:30 am OFF2: 12:00 pm* OFF3: 10:30 pm
Weekly 1) ON1: 06:30 am ON2: 12:00 pm ON3: 04:30 pm
OFF1: 08:30 am OFF2: 01:00 pm OFF3: 10:30 pm
Week- ON1: 06:30 am ON2: 12:00 pm ON3: 04:30 pm
Weekend 1) OFF1: 08:30 am OFF2: 01:00 pm OFF3: 10:30 pm
ON1: 06:30 am ON2: 12:00 pm ON3: 04:00 pm
OFF1: 09:30 am OFF2: 01:00 pm OFF3: 10:30 pm
Built-in programme HOME
Daily ON1: 06:30 am ON2: 12:00 pm* ON3: 04:00 pm
OFF1: 09:30 am OFF2: 12:00 pm* OFF3: 11:00 pm
Weekly 1) ON1: 06:30 am ON2: 12:00 pm ON3: 04:00 pm
OFF1: 09:30 am OFF2: 01:00 pm OFF3: 11:00 pm
Week- ON1: 06:30 am ON2: 12:00 pm ON3: 04:30 pm
Weekend 1) OFF1: 09:30 am OFF2: 01:00 pm OFF3: 11:00 pm
ON1: 06:30 am ON2: 12:00 pm ON3: 04:00 pm
OFF1: 09:30 am OFF2: 01:00 pm OFF3: 11:00 pm
Built-in programme ECO
Daily ON1: 06:30 am ON2: 12:00 pm* ON3: 05:30 pm
OFF1: 07:30 am OFF2: 12:00 pm* OFF3: 10:00 pm
Weekly 1) ON1: 08:30 am ON2: 12:00 pm ON3: 05:30 pm
. OFF1: 09:30 am OFF2: 01:00 pm OFF3: 10:00 pm
Week- ON1: 06:30 am ON2: 12:00 pm ON3: 05:30 pm
Weekend 1) OFF1: 07:30 am OFF2: 12:00 pm OFF3: 10:00 pm
ON1: 08:30 am ON2: 12:00 pm ON3: 05:30 pm
OFF1: 09:30 am OFF2: 01:00 pm OFF3: 10:30 pm
.
* On/off prgrammes with the same time cancel out - no switching will occur.
The built-in programmes can be selected in the INSTALLERS MENU.
To access to installers menu, the device must be working in RUN mode.
10 sec.
INST MENU
DIGI CLOCK
BACKLIGHT
S W CHANGE
PROG TYPE
1. Make sure the device is working in RUN mode.
2. Press and hold buttons at the same time for 10 seconds.
INST MENU opens and OK is fl ashing.
Z Z
3. Confi rm with .
Z Z Installers menu is activated.
4. Press 3 x until PROG TYPE is displayed.
5. Press to edit settings.
Preset value is fl ashing.
Z Z
6. Press or to scroll through the menu. choose your desired
setting (DaIlY, WEEklY 1) , 5-2 DaYS 1) ) and confi rm with .
Z Z The chosen setting is saved.
Z Z The next menu item NR PERIODS is displayed.
NR PERIODS
DEFAULT PROG
PUMP GRAVITY
7. Press to go to DEFAULT PROG.
8. Press to edit settings.
Preset value is fl ashing.
Z Z
9. Press or to scroll through the menu. choose your desired
setting (STD, HOME or ECO) and confi rm with .
Z Z The chosen setting is saved
Z Z The next menu item PUMP GRAVITY is displayed.
10. To save your settings, continue scrolling through the menu
options with key, until you once again see INST MENU / –
OK +, and fi nally leave the installers menu with key.
With QEG-1S, continue scrolling through the menu options with
key, until you see CHANGE PIN / – OK +, and fi nally leave
the installers menu with key.

Review/Edit central heating (CH) program

Depending on the product you can choose between three different
settings: Daily, Weekly 1) or Week-Weekend (5-2 days) 1) .
Daily all days (Monday - Sunday) are programmed
with the same ON/OFF time schedule
Weekly You can program each day (Monday, Tuesday, ...)
1)
with a different ON/OFF time schedule
Week-Weekend You can program Monday - Friday with a ON/
1)
OFF time schedule and Saturday - Sunday with
a different one.
You can choose the desired setting in the INSTALLERS MENU.
Every programme has three pairs of ON/OFF switching times
per day. Each time can be set between 3.00 am and 2.50 am
(on the next day).
Mo - Fr
Sa - Su
Example 1: Daily programming CH, built-in programme STD
DAY/ PROG RUN
TIME
ON1 CH
OFF1 CH
ON2 CH
OFF2 CH
Mo - Fr
ON3 CH
OFF3 CH
Sa - Su
ON1 CH
SAVED
HOT WATER HEATING
Override Override
Thu
07 / 02 / 2013
Extra Hour am Extra Hour
OFF OFF
Mode AUTO AUTO Mode
ONCE ONCE
CONT CONT
EXT HOUR EXT HOUR
ON1 +1 ON1 +1
+2 +2
+3 +3
Holidays DAY/ DHW CH RUN
TIME
OK
1. Press the SELECT until indicator lamp PROG is ON.
Select
Z Z Preset value ON1 (06:30) is fl ashing.
Mo - Fr
Set time:
Sa - Su
• If you make any changes, you must press OK to confi rm ALL
ON/OFF pairs before pressing the select button to return to
the RUN mode, otherwise your changes will be lost.
• Press or briefl y to increase/decrease the time in 1
minute steps.
Press and hold or longer than 2 seconds to increase/
decrease the time quickly.
Or press OK to confi rm a displayed (fl ashing) value
2. Enter hour and minute for the new ON1 command, or ,
and confi rm with .
Preset value OFF1 (08:30) is fl ashing.
Z Z
Enter hour and minute for the new OFF1 command,
3. or ,
and confi rm with .
Z Z Preset value ON2 (12:00) is fl ashing.
4. Enter hour and minute for the new ON2 command, or ,
and confi rm with .
Preset value OFF2 (12:00) is fl ashing.
Z Z
24.04.2013 11:37:31