Table of Contents
Advertisement
STEP 4: ASSEMBLING THE ENCLOSURE
• Take the Sleeved Net & eight Enclosure Poles (Part N) and lay flat on the trampoline mat
with the zip entrance facing towards you.
• Insert two enclosure poles into the sleeves on either side of the zip in positions 1 and 2 of this
diagram. Then insert two further poles opposite the first two, in positions 5 and 6.
• Insert each of the poles into the correct enclosure socket through the 10cm slot between the
pad sections (see picture below).
• Finally with the enclosure now half-assembled and upright, inserts the remaining poles into
the sleeves in positions 3, 4, 7 and 8 and then into the enclosure sockets. The bottom of the
net runs along the pads and is not tied off in any way.
8
Advertisement
Table of Contents
