Working Place Lighting - Electrolux IC44819FFS Installation Manual

Feeder ironer folder & stacker
Table of Contents

Advertisement

05102004
0608
Notice
Date

Working place lighting

The lighting should be designed so as to avoid eye strain for the operator ; it should be uniform
without any glare, and should be sufficient to detect any hazards.
The average lighting value on the working place recommended by the clothing industry for
inspecting linen is 500 lux.
Whenever possible, the working place should be illuminated by daylight.
Supplies
Take the box.
List of accessories provided with each machine :
• operating handbook + installation manual + electrical drawing + poster,
• 2 keys for frames.
Unpacking
You should have found an instruction handbook and keys to open the machine casings, in the
machine.
Depending on its destination, the dryer is delivered bare or may be placed on a transport pallet
and/or packed with plastic film.
In some cases, it may be delivered in a crate, or in maritime packing (wood box).
Please refer to the handling chapter in this instruction handbook for a description of handling
operations.
Take off the plastic film or remove the four wood socles with an spanner.
Check that no damage has been caused during transport.
1
7
Page
7. Installation
INSTALLATION
MANUAL

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic44825ffsIc44832ffs

Table of Contents