Select Base - GE 28225 Series User Manual

Press or
through the submenu [Registration].
Press [SKL] button.
Press or
Press [SKL] button.
Handset display shows SEARCHING.
Press and hold Page key on the base station for 10 seconds until
acknowledgement signal is heard.
Note: 1.Once the registration procedure is complete, the new
handset will automatically be allocated the next available handset
number.
2. The base will be ready for registration for 2 minutes when the
Page key is pressed and hold for more than 10 seconds. During the
handset searching for a base station which is available for
registration. "searching" will be shown on the LCD display .
Deregister HS
Press or
the submenu [Registration].
Press [SKL] button.
If necessary, use
[SKL] key. "Deregister HS?" will show on the display.
Press [SKL] key to confirm.

Select Base

Press or
the submenu [HS Settings].
Press [SKL] button.
key to choose the selection [Register Handset]
key to select [Base1],[Base2],[Base3]or [Base4].
key to choose the selection [Deregister HS] through
or key to select the handset and press
key to choose the selection [Select Base] through