Lascar EL-WiFi-TP Quick Start Manual

Changing Sensor Settings
This is done via EL-WiFi. Open the software
package, click on the 'View Sensors' icon,
select the sensor you wish to change and
click on the 'Adjust Sensor Settings' icon. The
software will lead you through the options that
can be amended.
Recharging
The sensor will automatically start recharging
whilst connected to a PC or USB charger. This
is indicated with a battery symbol
battery life of your sensor depends on the
regularity of transmissions. Battery life is
indicated on the 'Existing Sensors' software
screen accessed via the 'View Sensors' button
or on the unit itself. When the flashing low
symbol appears on the
LOW
LCD you should recharge the unit with the
USB cable provided. Whilst recharging the
unit accuracy tolerance will be exceeded.
Wall Bracket
Your sensor is a free standing product but it
also comes with a click-in bracket so that the
product can be clearly displayed and attached
onto a flat surface or wall. When using the
bracket or probe foam pad ensure it is stuck to
a clean, dry surface.
When placing your sensor consider local
heat sources and radio obstructions.
optimum WiFi performance you may need to
try positioning your sensor in various different
locations/positions. Any physical obstructions
between your router and sensor will affect the
range of the sensor. WiFi extenders can also be
used to gain improvements.
The signal strength of the sensor is displayed
on the LCD (see above). Number 10 is a strong
. The
signal, number 1 is a weak signal. When on
this screen, the user will automatically activate
an immediate transmission that will send
any stored readings. If the syncing screen is
displayed data is being transferred.
sensor
The signal icon has three states: not displayed
– the sensor has not yet been set-up and
configured to a WiFi network , flashing – not
communicating with EL-WiFi software, solid
– successful
software.
Technical Support
For technical support visit: www.lascarelectronics.com
Sensor Placement
For
communication with EL-WiFi
Issue 1 23/07/2012
EL-WiFi-TP
Quick Start Guide