Meat Slicer Safety Basic safety precautions should always be followed when using electrical products, especially when children are present. WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, ALWAYS MAKE SURE THAT THE PRODUCT IS UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE ASSEMBLING, DISASSEMBLING, RELOCATING, SERVICING, OR CLEANING IT.
Page 4
Meat Slicer CAUTION: This product is equipped with a polarised plug (one blade is wider than the other blade) as a safety feature to reduce the risk of electrical shock. This plug will fit into a polarised outlet only one way. This is a safety feature.
Meat Slicer Set-Up Specific safety advice on the location of the slicer: Never set the slicer up on a hot surface or near an open flame. Make sure that the power cord does not pass over any hot or sharp edged objects. ...
Meat Slicer Removing the Cutting Blade Pull off the blade mount and the blade lock by hand. Then turn it until it comes off. When taking out the blade, make sure that you handle it by the centre and be careful of the sharp edge. Wash the blade by hand in warm soapy water.
Page 8
Meat Slicer Correct Disposal of Product This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Page 9
Some experts believe the incorrect or prolonged use of almost any product could cause serious injury or death. For information that may reduce your risk of serious injury or death consult thepoints below and additionall y , the information available at www.datastreamserver.com/safety - Consult all documentation, packaging and - The product has been supplied by a general merchandise...
Need help?
Do you have a question about the COKSLCEUCA2RD and is the answer not in the manual?
Questions and answers