Advertisement
I
1.
2.
3.
4.
5.
Set the FUNCTION switch to TAPE.
Press the STOP/ EJECT button. The cassette
holder opens.
Load the cassette into the cassette holder.
I
I
After loading the cassette, press the cassette
holder back into position.
Press the PLAY button to begin playback.
Press the STOP/ EJECT button to stoD Dlav-
Note:
-
Use the normal tape (TYPE 1).
-
Endless tapes cannot be used.
Do not use C-100 (or longer) tapes. They may
jam in the mechanism.
Pause
Press the PAUSE button to temporarily stop play-
back or recording.
Press it again to resume
operation.
Fast forward
and rewind
Press the FFWD or REW button. When the de-
sired location has been reached, press the STOP/
EJECT button.
back at any time. Press it again to rerno;e
the cassette.
When the end of the tape has been reached,
the tape stops automatically.
1.
I
2.
3.
4.
Set the FUNCTION switch to RADIO.
To receive FM stereo broadcasts
Select the desired radio band with the BAND
Set the BAND switch to FM STEREO.
switch.
If the signal from an FM stereo station is weak
Tune in a desired station by turning the TUN-
and reception is poor, set the BAND switch to
ING control.
FM. The reception may be improved, but the
To turn the radio off, set the FUNCTION
sound will be monaural.
switch to TAPE/OFF.
To improve reception
FM: Pull out the telescopic aerial and adjust its
position.
AM: Rotate the unit.
7
Advertisement
