Putting On The Headset - Mattel Mindflex Instruction Manual

PUTTING ON HEADSET
1 . Put on the headset as shown. Make sure the forehead sensor located
under the Mindflex™ logo is positioned above your left eye, flat
Helpful Hints
against your forehead, with no hair between your skin and the sensor.
1 . Before putting on the
headset, be sure to
remove hats, ponytails,
2 . If the headset does not fit comfortably against your forehead,
hairclips or anything
use the buckle on the back of the headset to adjust for a snug fit.
else that might get
in the way, and
brush the hair from 3 . Attach the ear clips to each ear lobe
your forehead.
so the metal sensors are flat against
2 . Before attaching
your skin.
the ear clips,
remove earrings.
4 . While sitting as still as you can, turn
3 . Periodically clean the
on the headset – the headset's red
forehead and ear clip
Power Light will come on.
sensors with a cloth or
paper towel moistened
in warm, soapy water.
Forehead Sensor
On
Off
6
Ear Clips
On/Off Switch
Power Light