Grounding Connection - paco MCD-500VA Instruction Manual

If this voltage is in the range of 190-250V, the regulator provides the
100% listed maximum output power. maximum output power will change
as the curve shown below.
P(%)
100
75
50
25
100

12. GROUNDING CONNECTION

WARNING: BEFORE USING THIS AUTOMATIC VOLTAGE REGULATOR
YOU MUST PROVIDE A GROUND CONNECTION TO THE AUTOMATIC
VOLTAGE REGULATOR.
On the rear panel of the automatic voltage regulator there is a terminal fitted
with a nut. This terminal is connected to the case of the automatic voltage
regulator and also to the earth terminal of the AC output socket. The use of
this terminal will depend on your particular installation. In any installation,
heavy duty, green-insulated wire should be used for this connection.
Model: 500VA, 1000VA, 1500VA, 2000VA
120 140 160 180
THE POWER CURVE OF OUTPUT
FUSE
Fuse
Input
OUTPUT: 220V~
USE THE SAME CURRENT
FUSE FOR REPLACEMENT
200 220 240 260
Output
7
280 300 U(V)