Quick Reference Guide
V1030
6
For use by or on the order of a licensed veterinarian.
f
Attention, see operation manual for additional instructions for use.
Surgivet® V1030 Hand Held Pulse Oximeter
Monitor Operating Keys
B
1
Alarm Silence
Use this key to silence the alarms and to cancel the alarm silence.
2
Menu / Enter Key
Press this key to enter the menu system, and to advance to the next
menu selection.
Cancel / Exit Key
3
Press this key to exit the menu system.
n
Up and
o
Down Arrows
4
Use the up and down arrow keys to adjust pulse beep volume during
normal operation. In a menu, use these keys to adjust the selection.
x
5
ON/OFF Key
Momentarily press this key when the device is OFF to turn the monitor ON.
Press and hold this key when the device is OFF to clear the patient trend data.
Silencing Alarms
1.
Audible alarms can be silenced for two (2) minutes.
2.
To silence the alarm tone, press the
3.
The Alarm Silence indicator will light solid for the first minute and 45 seconds,
then flash the last 15 seconds.
4.
To cancel the 2-minute silence, press the
NOtE: the Alarm Silence key will not affect visual alarm indicators or pulse tone.
NOtE: Permanent Alarm Silence is not available.
Changing the Alarm Limits
1.
To select alarm limit defaults by patient type, press the
setting.
Pt
will be displayed as well as the current setting: Horse (
[Us
Custom (
).
Up and Down keys (
2.
Use the
Menu key (
3.
Press the
4.
Use the
Up and Down keys (
Menu key (
5.
Press the
Exit key (
6.
To exit, press the
V1924-ADD1 REV 0
Simplified Operation Guide
Alarm Silence key (
Alarm Silence key (
n o
)to select the desired patient type.
) again to display the desired alarm limit values for that patient type.
n o
) to increase or decrease the setting.
) to advance to the next alarm limit.
) or wait 20 seconds until the patient reading is displayed.
J
1
B
).
B
).
Menu key (
) once to display the current patient type
KrS
), Dog (
s
2010-6
�
B
B
4
4
4
2
d09
), Cat (
[At
), Factory (
5
3
FA[
), or
Page 1 of 2
Need help?
Do you have a question about the V1030 and is the answer not in the manual?
Questions and answers