RedMax EXTREME EXZ2500S-BC Owner's/Operator's Manual page 33

8. Operation
(EX-PS only)
IMPORTANT
The oil flow adjusting screw must be pressed in
slightly in order to turn. Failure to do so could
damage the pump and screw.
3. With a screwdriver, push in on the oil flow rate
adjusting screw and turn in the desired direction
(there are three incremental settings):
(a) Clockwise-decrease lubrication.
(b) Counter clockwise-increase lubrication.
(c) Middle
WARNING
• Always wear work gloves made of leather or
some other sturdy material when using the
polesaw.
• Falling branches may fall onto the face or
into the eyes, resulting in injuries, scratches,
and cuts, and for this reason you should
always be sure to wear a helmet and face
protector when using your polesaw.
33 