RedMax EXtreme EX-LRT Owner's/Operator's Manual page 23

8. Operation
OP9
.04 in
(1~2mm)
OP10
• Except for an emergency, avoid stopping the
■ ADJUSTING THROTTLE CABLE
• The normal play is 1 or 2mm when measured at
(1) cable adjuster
(1)
■ ADJUSTING IDLING SPEED (OP10)
1. When the engine tends stop frequently at idling
2. When the cutting head keeps rotating after
(1) idle adjusting screw
(1)
• Warm up the engine before adjusting the idling
IMPORTANT
engine while pulling the throttle lever.
the carburetor side end. Readjust with the cable
adjuster as required. (OP9)
mode, turn the adjusting screw clockwise.
releasing the trigger, turn the adjusting screw
counter-clockwise.
NOTE
speed.
23 