SECO-LARM Enforcer SB-L10V1-20Q Manual

Plug-and-play backup power

SB-L10V1-20Q

Plug-and-Play Backup Power

Manual

ENFORCER Plug-and-Play In-line Backup Power provides automatic continuous power to

CCTV cameras, routers, modems, VOIP phone systems, employee time and attendance

systems, alarm systems, or other small electronic devices during power outages. In addition, it

includes protection against short-circuits and power surges. The high quality lithium polymer

battery is also protected from short-circuit, overcharge, over-discharge, and overload.

Table of Contents

Need help?

Do you have a question about the Enforcer SB-L10V1-20Q and is the answer not in the manual?

Page 1 SB-L10V1-20Q Plug-and-Play Backup Power Manual ENFORCER Plug-and-Play In-line Backup Power provides automatic continuous power to CCTV cameras, routers, modems, VOIP phone systems, employee time and attendance systems, alarm systems, or other small electronic devices during power outages. In addition, it includes protection against short-circuits and power surges.
Page 2: Specifications
Flashing: Battery low Backup (Yellow) On: Backup mode Off: Line mode *Audible alarm – Continuous long beep indicates alarm or failure (see troubleshooting), 5 short beeps indicate transferring to backup power, and continuous short beeps indicate low battery SECO-LARM U.S.A., Inc.
Page 3: Parts List
Original Power Adapter SB-L10V1-20Q 1 2 3 4 5 6 7 8 9 ENFORCER ® 12V 9V 7.5V 5V DC plug adapters (not Included) may be required for devices which do not accept standard 2.1mm DC plugs. SECO-LARM U.S.A., Inc.
Page 4: Troubleshooting
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for 1 (one) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if...