Table of Contents
Advertisement
BACK FOCUS SCREW ADJUSTING
(e)
The external synchronization (Line Lock) switch is set to "ON" position at rhe
factory, The camera will synchronize to the zero crossing of incoming AC
voltage, which is connected to the middle pin of the power connector. Please
ensure that all the input AC voltage connection of the camera are on the same
phase. If the power voltage connection is reversed. the camera will lock at
180^
of the incoming AC voltage. When the wrong connection is found, please make
the correction for the zero crossing synchornization purpose.
To Use Auto Iris Lens
How
Please assemble the Miniature Plug (provided) for the Auto Iris Lens as shown in
(a)
the following diagram.
6
Advertisement
Table of Contents
