Table of Contents
Advertisement
A. Configure the Wi-Fi Repeater wirelessly
You can configure the Wi-Fi Repeater by connecting it with you computer/laptop
with enclosed RJ45 cable or wirelessly.
A1. The mode selector must be set to the
"Repeater" position for Repeater Mode.
A2. Plug the Wi-Fi Repeater to a wall socket.
A3. Click on the network icon
the right bottom of your desktop. You will
find the signal from the Wi-Fi Repeater
(2.4G) or Wi-Fi Repeater(5G). Click on
"connect" then wait for a few seconds.
A4. Open web browser and type
http://192.168.10.1
in the browser address box. This number
is he default IP address for this device.
Note: please check whether the Wi-Fi Repeater accord with factory default Settings
once you can't entered http://192.168.10.1. If you are still not sure what reasons,
you can reset the Wi-Fi Repeater, just need to press the reset button for 8 seconds,
then try again.
or
on
or
http://w.ap
06
Advertisement
Table of Contents
