Open Source Code This product includes software codes developed by third parties. These software codes are subject to either the GNU General Public License (GPL), Version 2, June 1991 are GNU Lesser General Public License (LGPL), Version 2.1, February 1999. You can copy, distribute, and/or modify in accordance with the terms and conditions of GPL or LGPL.
Getting Started Setting up a Wireless Infrastructure Network For a typical wireless setup at home (as shown below), please do the following: Wireless Repeater Mode The range of your wireless network is extended and made available for 2.4GHz and 5GHz wireless networks You will need Wireless AP/Router Internet access Wireless AP Mode...
LED indicators Status Meaning Excellent reception, signal strength Lights up 50% to 100% Good reception, signal strength 25% to 2.4G signal Flashes slowly 5G signal Weak reception, signal strength below Flashes rapidly NO reception Lights up The Wi-Fi Repeater is switched on WPS connection is established or WPS Flashes Power/WPS...
Page 6
Configure the Wireless Repeater Mode This is the easiest way to configure the Wi-Fi Repeater, First, check whether your wireless router supports WPS. For further details, please read the operating instructions for your wireless router. 1. The mode selector must be set to the "Repeater" position for Repeater Mode. 2.
Page 7
A. Configure the Wi-Fi Repeater wirelessly You can configure the Wi-Fi Repeater by connecting it with you computer/laptop with enclosed RJ45 cable or wirelessly. A1. The mode selector must be set to the “Repeater” position for Repeater Mode. A2. Plug the Wi-Fi Repeater to a wall socket. A3.
Page 8
A5. The login screen below will appear. Enter the User Name and Password then Click “Submit” to login. The default User Name is “admin” and Password is “admin” A6. After logging in, you will see the web page below: Click on the Repeater button in the Wizard field.
Page 9
A7. From the list, select a wireless network with which you want to connect the Wi-Fi Repeater by choosing the corresponding network in the "Select" field. A8. After hving selected a wireless network, you must then specify the network key of your wireless router for Security key.
Page 10
Configure the Wireless AP Mode Use the AP Mode to obtain a 'wireless access point" The wireless end devices will connect to the Wi-Fi Repeater in this mode. You can also use this mode, for example, to make a formerly non-wireless-enabled router wireless-enabled. 1.
Page 11
5. The following message will be displayed on your web browser: SSID Wireless SSID of the Wi-Fi Repeater Setup the wireless security and encryption to prevent from unauthorized access and monitoring. Security type Supports 64/128-bit WEP, WPA/WPA2 encryption methods. Security key The “Password”...
Page 12
Configure the Wireless Client Mode Client Mode enables end devices with a LAN interface (for example, computer, notebook or TV set), which have no own wireless network, to connect wirelessly to an existing wireless router. 1. The mode selector must be set to the "Client" position for Client Mode. 2.
Page 13
5. From the list, select a wireless network with which you want to connect the Wi-Fi Repeater by choosing the corresponding network in the “Select” filed. 6. After having selected a wireless network, you must then specify the wireless key of your wireless router for Security key.
Page 14
Management via Web Browser Wireless Base Configuration Please follow the following instructions: Click 'Wi-Fi -> Basic Settings" located at the web management interface, the following message will be displayed on your web browser. You could configure the basic setting of Wireless settings for communication, such as network name (SSID) and Channel.
Change Management password Default password of Wireless Repeater is "admin", and it's displayed on the login prompt when accessed from web browser. There's a security risk if you don't change the default password, since everyone can see it. This is very important when you have wireless function enabled.
Firmware Upgrade The system software used by this router is called “firmware”, just like any applications on your computer, when you replace the old application with a new one, your computer will be equipped with new function. You can also use this firmware upgrade function to add new functions to your router, even fix the bugs of this router.
Factory Default and Settings Backup, Restore You can backup all Setting of this router to a file, so you can make several copied of router configuration for security reason. To backup or restore router setting, please follow the following instructions: Please dick “Save/Reload setting”...
Page 18
How to connect your computer/laptop with the Wi-Fi Repeater Adding a Wireless computers to the Wi- Fi Repeater 1. Log on to the computer. 2. Open Connect to a Network by right-clicking the network icon ( ) in the notification area. 3 Choose the wireless network from the list that appears.
Page 19
Adding a wired (Ethernet) computer to the Wi-Fi Repeater with WPS This is the easiest way to establish a connection to the AP. First, check whether your end device supports WPS. For further details, please read the operating instructions for your end device. 1.
Page 20
How to configure you computer/laptop with the network IP Address 1. Log on to the computer 2. Click the "Start” button (it should be located at the lower-left corner of your screen), then dick "Control Panel". Click "View Network Status and Tasks", and then dick "Manage Network Connections".