A Nalogue - Philips DVDR3577H/05 Service Manual

Reference : SGP_AVS_SW_ATLAS-05-05
Version : 0.17
Status : Proposed
Date : 2006-09-12
1
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
2
Nucleus Name
Nucleus Number
Description
Technical
Execution Time
User Input
Error
Example
3
4
© Philips Electronics N.V. 2006
DS_SYS_UartWrite
1211
Perform an UART write action on the digital board on a specified UART
- Decode the user input for the proper port to use
- Write out the bytes through the indicated port
Less than 1 second.
The user inputs the UART to write to, the number of bytes and the bytes to be
written to the UART.
1=UART port 1 : not used
2=UART port 2 : Bit Engine
3=UART port 3 : Analogue board
<UartNr><Number of bytes to write><d1><d2><..><dx>
Number Description
121100 Writing the bytes to the UART succeeded
121101 The user provided wrong input
121102 Writing to the UART failed
DS:> 1211 2 2 0xd1 0x01
121100:
Test OK @
DS_SYS_UartRead
1212
Perform an UART read action on the digital board on a specified UART
- Decode the user input for the port to read from
- Read from the port and return data read to the user
Less than 1 second.
The user inputs the UART to read from.
1=UART port 1 : not used
2=UART port 2 : Bit Engine
3=UART port 3 : Analogue board
<UartNr >
Number Description
121200 Reading the data from the UART succeeded
121201 The user provided wrong input
121202 Reading the data from the UART failed
DS:> 1212 2
121200: The HEX value that was read is:
Test OK @
Classification : COMPANY RESTRICTED
Project : ATLAS_DSW
Chapter : User Manual
Section : Diagnostic Software (Leco+)
0x50 0xD1 0x00
Philips Semiconductors Page 53 of 124