Nikkei Extreme X1 User Manual page 29

2. Ensure the Video is set to car mode and Screen has been
rotated
3. Attach the suction cup to the front windshield, then pull
down on part 1 (shown Above) to fasten the suction cap to the
windscreen.
WATERPROOF C ASE C A R I NG INSTRUCTIONS
Before sealing the waterproof case, keep the camera housing's
rubber seal clean, a single hair or grain of sand can cause a leak.
You can test by closing the case without inserting the camera.
Submerse the case completely in water for about a minute.
Remove the case from the water, dry off its exterior with a
28