Table of Contents
Advertisement
Sampler connectors
Signal connector
REMOTE connector
TEST PORT connector
LAN connector
7820A GC Installation Manual
If using an ALS, connect to the GC using the following
connectors:
ALS PORT Tray
The sampler tray, if equipped.
ALS PORT Front
An injector, typically mounted over the front inlet.
ALS PORT Back
An injector, typically mounted over the back inlet.
The two analog output signal.
Provides a port to remotely start and stop other
instruments. A maximum of 10 instruments can be
synchronized using this connector. See
Start/Stop cable"
on page 34 for more detail.
This connector is reserved for future development.
Standard Local Area Network connector, for
communication with data systems and other devices.
7820A GC Installation Guide
"Using the Remote
33
Advertisement
Table of Contents
