Adesso MG293 Instruction Manual page 9

PROGRAMMING YOUR USER PROFILE
This scale has 8 personal memory profiles (PI-P8) that can be used to record gender and age for upto 8 different
users. In order for this scale to provide measurements on body fat and water ratios, it must first have the person's
gender, height and age saved in one of the scales memory profiles, followed immediately by a reference weight. The
scale will reference this information in the algorithms it uses to provide the body fat and water ratio measurements.
Please note: you do not need to set up a memory profile if you only desire a weight measurement.
1. Select your desired unit of measurement (Ibs or kg) by using the switch located underneath the scale.
2. Turn the scale on by pressing the Set/Select button.
3. Select your user number (1-8) using the < or > arrow buttons. Then press the Set/Select button to confirm.
4. Select your gender using the < or > arrow buttons. Then press the Set/Select button to confirm.
5. Select your height using the < or > arrow buttons. Then press the Set/Select button to confirm.
6. Select your age using the < or > arrow buttons. Then press the Set/Select button to confirm.
7. After entering your age, 0.0 will display on the LCD screen. In order to complete the programming of your
user profile, immediately step onto the scale to get your weight associated with your user profile. If you do not
immediately step onto the scale while the LCD screen displays 0.0, start over from Step 2. Please note
that the scale will automatically turn off after a few seconds of inactivity in order to preserve battery life.
Note: To add additional users, simply repeat the steps above.
Digital Bodyfat Scale IM.indd 9 8/10/13 9:45 AM