TE Connectivity 2063870-1 Instruction Sheet

Battery Charger
Left-Side LED
Right-Side LED
BATTERY POWER
CHARGER ADAPTER
2063870-1
2063874-1
2280961-1
2063870-2 2063874-2
2063870-3 2063874-3
2063870-4 2063874-4
2063870-5 2063874-5 China, Australia, New Zealand
1. INTRODUCTION
Battery Chargers 2063870-[ ], 2280961-1, and AC-to-DC Power Adapters 2063874-[ ] are designed to be used
with the electro-hydraulic hand tool included in Electro-Hydraulic Hand Tool Kits 2031400-[ ]. The battery
charger is used to recharge Battery 2031440-1 (included with the hand tool kit). The AC-to-DC power adapter
enables the hand tool to be used without the battery.
For operating procedure and safety precautions for the hand tool kit, refer to Customer Manual 409-10095.
NOTE
The battery charger is also included with the hand tool kit, and the AC-to-DC power adapter is only available separately.
NOTE
All numerical values in this instruction sheet are in metric units [with U.S. customary units in brackets]. Figures are for
reference only and are not drawn to scale.
2. DESCRIPTION
See Figure 1 for features of the battery charger and power adapter. Specifications for the battery chargers and
power adapters are given in Figure 2.
BATTERY CHARGER
Battery Type:
Output Voltage Range:
Charging Current:
Charging Time (1.3 Ah):
Operating Temperature Range:
© 2015 TE Connectivity family of companies
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
Battery Chargers 2063870-[ ],
2280961-1, and AC-to-DC Power
Adapters 2063874-[ ]
Terminal
(3 Places)
Cord and Plug
INPUT VOLTAGE AND
REGION
FREQUENCY RANGE
North America 100-120 V, 50-60 Hz
Continental Europe 220-240 V, 50-60 Hz
Great Britain 220-240 V, 50-60 Hz
Japan 100-120 V, 50-60 Hz
220-240 V, 50-60 Hz
Figure 1
Lithium-Ion (Lilon)
9.6 to 28.8 VDC
3 A
25 Minutes (Approximately)
+5 to 40ºC [41 to 104ºF]
Figure 2
PRODUCT INFORMATION 1-800-522-6752
Power Adapter
Terminal
(3 Places)
CURRENT REQUIREMENT (PLUG TYPE)
BATTERY CHARGER
0.41 A (NEMA 1-15)
0.18 A (EU CEE 7/16)
0.18 a (bs 1363)
0.41 A (NEMA 1-15)
0.18 A (AS/NZS 3112)
POWER ADAPTER
Nominal Output Voltage:
Output Current Range:
Operating Temperature Range:
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
Instruction Sheet
408-10363
Rev B
07 AUG 15
Latch
LED (Bottom
of Adapter)
Cord and Plug
POWER ADAPTER
4.5 a (NEMA 1-15)
2.0 A (EU CEE 7/17)
2.0 a (BS 1363/A)
4.5 A (JA1-15P)
2.0 A (AS/NZS 3112)
10.8 VDC
10 to 33 A
+5 to 40ºC [41 to 104ºF]
---
1 of 3