Page 1
Quick Guide Setting up your new Optika Collaborate Display 85UHD Getting Started Optika Collaborate series host computer, Display- Your display requires a Port, HDMI or DVI cable, device power cable USB cable. and a DisplayPort and USB cables are included.
Page 2
Quick Guide Connecting Cables to the 85UHD Optika 1. Connect your display cable to the appropriate input. recommends DisplayPort interface connection via the for most systems. Quick Reference Guide...
Page 3
Quick Guide USB cable 2. Connect the directly from the host computer to the touch Touch” on the back of the display. interface marked “USB USB 3.0 cable Source” to the 3. Connect the from the port marked “USB host computer. blue 4.
Page 4
At initial startup the (OSD) will show the detected active port, resolution and frequency. Note: The Optika Collaborate series works via standard HID interface and no drivers are required for touch operation. USB 3.0 hub Your display also includes a built in powered...
Page 5
Display control is also available via serial RS-232 commands. Usage Your Optika Collaborate UHD Display is rated for 24/7 operation and may be left powered on at all times. Supported Resolutions 720 X 400 70 Hz 640 X 480 60 Hz...
Need help?
Do you have a question about the Collaborate 85UHD and is the answer not in the manual?
Questions and answers