Advertisement
Quick Links
Quick Guide
Setting up your new Optika Collaborate Display- 55UHD, 65UHD
Getting Started
Your Optika Collaborate series display requires a host computer, DisplayPort, HDMI or DVI cable, device
power cable and a USB cable. DisplayPort and USB cables are included. Also included is an optional USB
3.0 cable for operation of the built-in USB 3.0 hub.
Depending on the graphics capabilities of your PC, Optika Display recommends the use of a DisplayPort
cable to facilitate full 4K (3840 x 2160) resolution at 60Hz.
Some newer computers may also be equipped with an HDMI 2.0 ready port for full 4K at 60Hz.
Note: HDMI 1.4 is common, and capable of full 4K at 30Hz, which may introduce some lag in the per-
ceived touch experience.
Quick Reference Guide
1
Advertisement
Summary of Contents for Optika Collaborate 55UHD
-
Page 1: Getting Started
USB cable. DisplayPort and USB cables are included. Also included is an optional USB 3.0 cable for operation of the built-in USB 3.0 hub. Depending on the graphics capabilities of your PC, Optika Display recommends the use of a DisplayPort cable to facilitate full 4K (3840 x 2160) resolution at 60Hz. - Page 2 Quick Guide Connecting Cables to the 55UHD, 65UHD 1. Connect your display cable to the appropriate input. Optika recommends connection via the DisplayPort interface for most systems. 2. Connect the USB cable directly from the host computer to the touch interface marked “USB...
- Page 3 Quick Guide 3. Connect the USB 3.0 cable from the port marked “USB Source” to the host computer. 4. Connect the power cable to the power port. Quick Reference Guide...
-
Page 4: System Requirements
Once plugged in, power on the display via the remote or display control pad. Power will be indicated by a light above the button pad. Finally, turn on the host computer. The Optika Collaborate series is designed to activate the first active source while automatically cycling through potential inputs. -
Page 5: Network Interface
Quick Guide Network Interface You may control all of the display settings of your Optika Collaborate UHD Display via a built in web interface. See the Network Operation Guide for details. Display con- trol is also available via serial RS-232 commands.