Stereo Amplifier/Receiver - RCA VR725HF User Manual

Connecting a Stereo Amplifier/Receiver
Record on the VCR from an
amplifier/receiver.
Connect your VCR to a stereo amplifier/
receiver to record stereo audio.
1.
2.
3.
4,
Select a hookup from pages 2 through 7
and then modify with this connection.
Connect as shown.
This connection requires additional accessories
not provided.
Plug in power cords of amplifier/
receiver, VCR, and TV.
Turn to page 32 for "Recording Audio
Only."
Select the line input ("1_1" or "L2") on the VCR
to receive the audio signal from the
amplifier/receiver.
Back of VCR
AudioNideo Cables
Back of
Amplifier/Receiver
_E_@ @ @
R,G.T @ @ @ @
REC PLAY
PHONO TUNER TAPE AUX
Play back stereo tapes or
receive a stereo broadcast
through an amplifier/receiver.
Connect your VCR to a stereo
amplifier/receiver to receive stereo
broadcasts or play back stereo tapes.
1. Select a hookup from pages 2 through 7
and then modify with this connection.
2. Connect as shown.
This connection requires additional accessories
not provided.
3. Plug in power cords of amplifier/
receiver, VCR, and TV.
4. Turn to page 20 for "Playback
Operation."
Back of VCR
IN FROM
ANT.
VHF/UHF
@
AUDIO1 VIDEO1 /_
Audio/Video Cables
Back of
Amplifier/Receiver
LE=" ' @ @ @
=,G,.-,T i@ @ @
REC PLAY
PHONO TUNER TAPE AUX
9