System Specifications; Installing The Transmitter Batteries; Installing The Battery Pack - Himoto hummer E18HM Instruction Manual

System Specifications

MT-201T
RF
Operating

Installing the Transmitter Batteries

Installing the battery pack

MT-201
Antenna (Built in)
Open the battery holding
tray to expose the empty
battery slots.
Insert 4 AA batteries
into the marked spaces.
Please note the correct
direction of the batteries
You need to insert the
battery pack in the open
section for the battery.
Use the chassis cut-out
for corner wiring if
needed. Use the straps
provided to secure the
battery in place.
MT-201RE
6.0~8.4V(
6.0~7.4V(Li-poly 2s)
Steering Dual Rate
Antenna Wire
1
03
)
Steering Trim
Lerer (CH1)
Lever (D/R)
Connects to the steering servo
Switch
Battery connector
Motor connector
LED Indicator
Incorrect battery insertion
could damage the transmitter
2.4Ghz technology has done
away with the need for long
extendable aerials. The Aerial
on your transmitter is located
internally
Once fastened and secured
please connect the battery
plug into the speed controller
plug noting correct polarity.
Red to red, black to black.
Working Station
Indicator