Table of Contents
Advertisement
Programming the Timer (continued)
I
[s]
The display will prompt
you to select either
AM or PM.
NORMAL
pRC_3AAM
PROGRAM
CH O4
tO END PUSH PROGRAM
:
Press "1" for AM or "2" for PM
[6]
The display will prompt you to select the stop-
ping time.
,If
NORMALPROGRAM -_
/
PROGRAM
I
l
C_ 04
TIME ON 06 00 PM
I
TIME OFF
I,
J
_mo
push PR
9RAY
Press four digits, two for the hour and two
more
for
the
minute.
For
example,
press
0 8 0 5 for 8:05. (Always press "0" before a
single-digit
hour or minute.)
[7]
The display
will prompt
you to select either
AM or PM.
_
.--+
_
NORMAL
pROGRAM_
pROGC_AM
1
/I
GH ¢4
T_ME ON 06 00 PM
It
TIME OFF O8¸O5
I
AM-1
PM-2
i
TO END PUSH
P_OGRAM
]
i
Press "1" for AM or "2" for PM.
[8]
The display will show "START DATE" followed
by the current date and day.
If you want to start recording
on the current
day, skip to Step 9.
PRC_3F_AM
I
_,,
CH 04
!I
TIM_ Oft 06 CO pM
TIME OFF 06:05 pM
!
START DATE 071_91B6
SAT
, T O END PUSH
PROGRAM/
J
If you want to start recording
on a future date,
press four digits (two for the month and two
for the day). Press "0"
first for a single-digit
month or day. For example, press 0 8 0 5 to
begin recording
on August 5.
The year and day of the week are displayed
automatically
when you finish.
[9]
Press PROGRAM
to enter your program
and
return to the original
display.
Additional
pro-
grams may be entered by repeating
steps 2-9.
_
TO SELECT
MOD[
_/
_us..uMee.s.ow. _,
If yOU have no other programs to enter, press
I
CLOCK
SET
32"OmM*L
P.OGR*_D,,L+
..OGR^_
I
PROGRAM again.
4 WEEKLY
PROGRAM
[10]
Turn off the VCR.
Checking
the Timer Programs
Programs
can be checked
whenever
the VCR is not
recording.
1. Press PROGRAM on the remote hand unit to display
the programming
menu.
2. Press 5 (Program Review).
The TV screen will display for ten seconds the infor-
mation you entered for the lowest program number.
Then the display changes to the next higher program
number,
and so on until all program information
has
been displayed.
3. Press 5 again if you want to view the next program
information
without
waiting ten seconds.
4, When you are finished,
press
PROGRAM
to erase
the on-screen
display.
Clearing a Timer Program
1. Press PROGRAM on the remote hand unit to display
the programming
menu.
2. Press 5 (Program
Review).
The TV screen will display for ten seconds the infor-
mation you entered for the lowest program number.
Then the display changes to the next higher program
number, and so on until all program information
has
been displayed.
3. Press 5 again if you want to view the next program
information
without
waiting ten seconds.
4. Press CLEAR
when the program
information
you
want to clear is displayed.
5. Press PROGRAM to erase the on-screen
display.
Notes:
• Normal
timer programs
clear automatically
when the
recording
is finished,
but daily and weekly
programs
remain in the timer indefinitely,
• All programs
are erased if power is interrupted
for
more than approximately
ten minutes.
24
Advertisement
Table of Contents
