Introduction - PRO-flex ACP3000_4/36 Operating Instructions Manual

______________________________________________________________
2.

INTRODUCTION

The PRO~flex ACP3000_4 and ACP6000_4 are AC current
probes utilising Rogowski principle. They can be used to measure
AC current up to 3000A and up to 6000A respectively, when used
with oscilloscopes, recorders or data loggers. The flexible probe
allows current measurements on conductors that are hard to
reach.
The probes provide a 3V full scale AC output proportional to the
current being measured with three selectable ranges.
1. Probe Coupling
2. Probe Output Cable
3. Flexible Current Probe
4. Power On / Range Switch
5. RED LED – Overload
6. ORANGE LED – Low Battery
7. External Power Supply Input
8. Integrator Housing
9. Output Cable
_______________________________________________________________
5
1
2
7
3
8
Fig 1
2
4
5
6
9