Advertisement
DISSAMBLING AND TREATMENT
1) TAKE THE CORD REEL OUT OF THE COVER ASSEMBLY.
2) UNSCREW THE SCREW(22).
3) SEPARATE THE BOBBIN(1) FROM THE BRACKET(10) AND CHECK THE CONTACTS BETWEEN THE Y TYPE TERMINALS(11) AND
THE RING TYPE TERMINALS(3, 4).
4) CHECK THE LEVER SPRING(20).
5) IF THE ROLLER BRAKE(18) IS WORN OUT AND SEPARATE THE LEVER(17) FROM THE BRACKET(10), THEN REPLACE THE ROLLER
BRAKE(18). AT THIS TIME, THE BOBBIN(1) IS ROTATED COUNTERCLOCKWISE DUE TO THE PRESERVED WINDING.
6) IF THE REEL SPRING(8) IS BROKEN, UNSCREW THE 2 SCREWS(9) AND REPLACE IT.
7) UNSCREW THE SCREW (6) AND SEPARATE THE HOLDER TERMINAL(2) FROM THE BOBBIN(1).
8) CHECK THE CONNECTIONS BETWEEN THE POWER CORD(5) AND THE RING TERMINALS(3,4).
9) WHEN ASSEMBLING, MAKE THE RESERVED WINDING 5 REVOLUTIONS OF THE BOBBIN CLOCKWISE.
WHEN DISASSEMBLING, THE REEL SPRING MAY SPRING
OUT OF THE COVER.
12
Advertisement
