RCA TV/VCR User Manual page 30

Using the TV/VCR's Features
REC TIMER PROGRAM
MODE CH START
1
2
3
4
5
COMPLETE NEXT CHANGE DELETE
SELECT /
PREVIOUS
REC RESERVATION-1
MODE
CH
START
STOP
SPEED
SELECT /
PREVIOUS
REC TIMER PROGRAM
MODE CH START
1 FRI 10 4:30PM
2
3
4
5
COMPLETE NEXT CHANGE DELETE
SELECT /
PREVIOUS
REC TIMER PROGRAM
MODE CH START
1 DAILY 10 4:30PM
2 MON-FRI 58 10:00AM 11:30AM EP
3 20(SAT) 56 11:30AM
4
5
COMPLETE NEXT CHANGE DELETE
SELECT PROGRAM TO DELETE
SELECT /
PREVIOUS
MENU
TIME
VIDEO ADJUST
AUDIO ADJUST
CLOSED CAPTION
TIMER RECORDINGS
LANGUAGE
SETTING
V-CHIP BLOCK
SELECT
PREVIOUS
28
3. Press the right arrow button to select NEXT and press OK.
STOP
4. Press the up or down arrow button to scroll through the MODE settings
5. Press the up or down arrow button until the correct channel appears in the
10:20AM OCT.15(MON)
: SET OK
6. Use the up or down arrow buttons and the OK button to enter the hour
: QUIT MENU
7. Review the information to make sure it is correct, and then use the left or
FRI.19
10
4:30PM
6:30PM
SP
10:20AM OCT.15(MON)
: SET OK
8. Repeat steps 4-7 for additional programs.
: QUIT MENU
9. Insert a tape with safety tab intact before the recording is to begin. Press
STOP
6:30PM SP
10. For cable box or satellite receiver, turn it on and tune it to the channel you
10:20AM OCT.15(MON)
: SET OK
: QUIT MENU
STOP
6:30PM SP
1:20PM SP
10:20AM OCT.15(MON)
: SET OK
: QUIT MENU
Check, Change, or Delete Timer Recordings
If the PROGRAM EVENT indicator on the front panel of the TV/VCR is lit, you
must press the TIMER button on the remote to turn it off before you can change
or delete a program.
1. Press MENU (the main MENU appears).
2. Press the up or down arrow button to select TIMER RECORDINGS and press
OK (the REC TIMER PROGRAM menu appears).
/ : SET OK
: QUIT MENU
3. To change a program, use the left or right arrow buttons to select CHANGE
and press OK. Use the up or down arrow to select the program you want
to change and re-enter the program.
(i.e., how often): DAILY--every day, MON-SAT – Monday through Saturday,
MON-FRI, – weekdays, or a certain day of the week) and press OK.
CH field, and press OK to set it.
and minutes for the START and STOP time and SPEED (SP or EP).
right arrow button to select COMPLETE if you are finished or NEXT if you
wish to enter another program.
The data includes the date, channel number, start and end times (including
AM or PM), and speed. To correct a previous entry during a timer setting,
use the left arrow to select the item you want to change, and press OK.
the TIMER button on the remote. The PROGRAM EVENT indicator on the
TV/VCR's front panel will light when a timer recording is set.
Note: If you press the TIMER button and haven't put a tape in the TV/VCR,
the PROGRAM EVENT indicator will flash. If you've inserted a tape that
has had its safety tab removed, the tape will be ejected.
want to record before the recording is to begin.
Notes: To operate the TV/VCR when the PROGRAM EVENT indicator is on,
press TIMER on the remote to turn off the indicator. When you are
finished, be sure to insert a tape and press the TIMER button to set the
TV/VCR.
If two programs overlap, the end recording time of the first program will
have priority over the start of the second program.
Chapter 3