Delta Rostock mini G2S Pro Manual page 4

special care and attention should be made when handling these parts
of the printer during operation.
We wouldn't recommend leaving your printer running unattended,
or at least until you are confident to do so. We cannot be held
responsible for any loss, damage, threat, hurt or other negligent result
from either building or using the printer.
INTRODUCTION:
This Rostock mini G2s pro is a upgraded delta 3D printer
redesigned by Geeetech.
Compared to its predecessor, this G2s pro has two major merits, it
looks cooler and it works better.
The printing effector of the G2s pro is upgraded with metal parts,
which are more durable and stable than the prints. The whole machine
is craft out of high-quality aluminum and laser cut acrylic plate,
making it more stable and smooth when printing, improving the
printing accuracy and speed to a higher level.
An metal auto-leveling device is also improved on G2s pro;
which means you do not have to adjust it every time before you start
- 3 -
GEEETECH