Table of Contents
Advertisement
Recording a Program
Express Recording
Express recording lets you record up to four hours or to the end of the tape without programming
the timer. You can begin recording immediately. The TV/VCR will stop automatically at the end
of the recording.
How to Use Express Recording
1. Insert a tape with safety tab in place.
2. Select the channel to be recorded.
3. Press SPEED to select a recording speed.
4. Press REC twice to activate express recording.
5. Press REC repeatedly until the desired amount of
The TIMER REC indicator on the TV/VCR's front panel
will light during express recording.
During express recording, press REC to display the time
remaining on the screen. Press REC again to increase the
recording time.
Important: This feature is not available in any DC mode.
Stopping an Express Recording in Progress
Press and hold STOP/EJECT on the TV/VCR or STOP on
the remote to stop the express recording.
Repeatedly press REC until RECORD LENGTH: 0:00
appears. The recording stops after a few seconds.
24
The TV/VCR will turn on.
To record from the AUDIO/VIDEO IN jacks, press
INPUT. Two selections appear in the channel field. Press
1 to select VIDEO 1, the rear AUDIO/VIDEO IN jacks.
Press 2 to select the front panel AUDIO/VIDEO IN jacks.
You can also change the speed of the recording
in progress.
recording time is displayed.
Each time you press REC, the recording time increases
as shown below:
Display
— OR —
Press
Recording
REC
Time
(
0:30
30 Min)
1:00
(1 Hr)
1:30
(1 Hr, 30 Min)
2:00
(2 Hrs)
3:00
(3 Hrs)
4:00
(4 Hrs)
0:00:00
(Normal Record)
0:00
(Turns Off)
Advertisement
Table of Contents
