Disassembly Instructions - Philips MC-D370/22 Service Manual

DISASSEMBLY INSTRUCTIONS

Dismantling of the Top Cover Assembly
1) Loosen the 4 screws on the left/right sides and the back
panel of the set.
- 4 screws "A" on the left and right side as shown in
Figure 1.
- 2 screws "B" on the back panel as shown in the
Figure 2 .
Figure 1
A
2) Shift the top cover from the bottom cover and remove all
the cables "C" that connect to the Main(Servo) PBC
board as shown in Figure 3.
Figure 3
3-1
B
K
Figure 2
Dismantling of the Main(Servo) Board
1) Unplug all the cables fom the servo board.
2) Loosen 4 screws "D" to remove the Servo Board from
the top cover as shown in Figure 4.
C
Figure 2
D
Figure 4
Dismantling of the Front Panel from the Bottom bracket
1) Loosen 2 screws "E" on left/right sides of the bottom cover
as shown in Figure 5.
2) Rip the lable on the bottom side and loosen 1screws "F"
as shown in Figure 6.
3) Loosen 2 screws "G" as shown in Figure 7.
4) Unplug the 2 cables "H" connect Key board and the
Amplify Board as shown in Figure 7.
5) Shift the front panel from the bottom bracket.
E
Figure 5
Dismantling of the Phone Board From the Front Panel
1) Loosen 2 screws "I" on the bottom cover as shown in
Figure 8.
I
Figure 8
3-1
F Figure 6
G
H
Figure 7
Dismantling of the Key Board From the Front Panel
1) Loosen 9 screws "J" on the bottom cover as shown in
Figure 9.
J
Figure 9