Page 1
Petrol Line Trimmers & Brushcutters BC 230B S2 / BC 260B S2 / BC 325 S2 / BC 260 S2 / BC 260E/B S2 Includes engines: IE34F-2E and IE34F Owner’s Manual Important Please read this Owner’s Manual and the Express Warranty before using this product.
SYMBOLS ON THE MACHINE SYMBOLS IN THIS OWNER’S MANUAL PROPER USE BC 230B S2 AND BC 260B S2 PARTS LOCATION BC 260 S2 PARTS LOCATION BC 325 S2 PARTS LOCATION BEFORE BEGINNING WORK SAFETY PRECAUTIONS NOTES ON TRANSPORTATION ASSEMBLY FUEL...
Do not operate this machine before it has been exist which might make your footing unsteady. assembled correctly and you have read and understood At night or in times of fog where it would not be possible these instructions. to have a clear view of the cutting area. During rain or electrical storms, during gale force winds Keep the instructions in a safe place for future use.
Safety precautions When replacing the blade or any other parts, always be sure to use only genuine MORRISON spares. Before Starting the engine Take a careful look around to make sure that there are no Notes on transportation obstacles within a radius of 15m around the brush cutter.
THROTTLE CABLE AND IGNITION WIRES ‘L’ shaped locking bar inserted through the outer shroud. (BC 260 S2 and BC 325 S2 only) Blades can only be used on straight shaft models blade to the projection on the inner flange. In the case of Put the blade Connect the two ignition wires running from the trigger grip to on the inner flange, matching the hole in the the 80 &...
FITTING THE HARNESS (BC 325 S2) Check that there is fuel in the tank The harness on the BC 325 S2 must always be used as the and that the fuel cap is screwed on machine cannot be operated safely without it.
Cut grass by swinging the brushcutter from right to left with the BC 230B S2 and BC 260B S2 models, and left to right with the BC 260 S2 and BC 325 S2 models. While you can cut in either direction, if you follow these suggestions the cut grass will be thrown away from you, and you will avoid getting your clothes dirty.
Pull the starter rope 2~3 times and then replace the spark plug. GEAR CASE (BC 260 S2 and BC 325 S2 only) Apply anti-rust oil to the metal parts such as the throttle wire, •...
Need help?
Do you have a question about the BC 325 S2 and is the answer not in the manual?
Questions and answers