More Information; Troubleshooting Tips; Customer Service And Technical; Technical Specifi Cations - RCA B-008ATD User Manual

More information

Troubleshooting tips

Unit does not work.
• Unplug the AC power cord and plug it
back in.
No picture on the TV screen.
• Make sure the converter box is turned on.
• Make sure the connections between the
converter box and TV are properly done.
• Choose different channels or video inputs
on the TV set until the picture appears.
No sound.
• Make sure the connections between the
converter box and TV are properly done.
• Make sure the TV sound is not muted.
Remote control does not work.
• Make sure the batteries are inserted
correctly.
• Replace the batteries if they are
exhausted.
• Remove any obstacles between the
remote control and the converter box.
• If the remote control works with the
converter box but does not work with
your TV, reprogram the remote control,
following the steps in "Program the
remote control".
Cannot watch a bilingual TV program in
its secondary language.
• Make sure you have correctly selected
the audio settings. Refer to AV settings
in the main menu.
Forgot password.
• Choose "Ratings" in the main menu
and input the master password "3308".
Create a new password. (The master
password cannot be used to unlock
programs for viewing.)
The Converter Box has turned off
suddenly.
• Check if Auto Power Down Timer is
activated in the main menu. It is set to
4 hours by default.
12
DTA800B_EN(IB).indd 12
Weak signal or channel not available.
• Try to reposition the antenna. If the
signal is still weak, a more powerful
antenna may be required to boost
reception for the Digital TV signal. A
Smart Antenna is recommended.
The TV is newly changed to an RCA
TV set and the remote control cannot
control it.
• Reprogram the remote control, following
the steps in "Program the remote
control".
Smart Antenna is newly connected and
channel scan is required.
• In the menu, press 5 for Settings and
then press 1 for Channel Scan.
Customer service and
technical support
www.1800customersupport.com/RCA
Technical specifi cations
Power supply: AC 120V/60Hz
Power consumption: <1W (standby)
<7W (operating, HD mode)
Remote reception distance: >8m from front
RF freq. range: 57MHz – 830MHz
RF channel range: CH2 – CH69
RF sensitivity: -83dBm to -5dBm
RF impedance 75 ohms
Output channel: CH3/CH4, selectable
Video system: NTSC
Video output: 1V peak-to-peak
Video output impedance: 75 ohms
Audio output impedance: 600 ohms
Unit size (L x W x H): 190 x 140 x 38mm
Net weight: 0.4kg
Dolby and the double-D symbol are trademarks of Dolby
Laboratories. Manufactured under License from Dolby
Laboratories.
DTA800-B
17/01/2008