Advertisement
3. CHARGING
Note: Fully charge the lamp before first use.
3.1
Connect the charger into the charge socket on the
lamp. Plug into power supply and turn on, the red
charge LEDs on the lamp (Fig.1) will light to show
charging has commenced.
3.2
When the battery has fully charged (approx 4hrs) the
red LEDs will go out and green LED's will come
on. Disconnect from mains supply.
3.3
During usage, when the battery is low the red
charging LED's will start to flash. When this happens
switch off the lamp and re-charge.
Note: The Lithium battery does not suffer from memory
effect and once fully charged may be stored for up to
six months without another charge.
4. OPERATION
4.1
Direct the lens away from your eyes before switching
on.
Switch the lamp 'ON & OFF' using the push switch
on the handle.
4.2
Suspend the lamp by the hanging hook.
When the light is hanging from its hook it can be
rotated through 360° for more precise positioning.
4.3
You may also use the integral magnet to attach the
lamp to metalwork such as under-bonnet.
Note: LED arrays are designed to allow individual
LEDs to cease functioning without causing the entire
array to fail. This could be as a result of shock or
impact. Shock or impact will invalidate warranty.
Parts support is available for this product. To obtain parts please
email sales@sealey.co.uk or phone 01284 757500.
Environmental Protection.
Recycle unwanted materials instead of disposing
of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycle
centre and disposed of in a manner which is
compatible with the environment.
When the product is no longer required, it must
be disposed of in an environmentally protective
way.
Battery Removal
1.
Remove six screws and open casing from front.
2.
Clip wires attached to main board and dispose
of battery according to local authority
guidelines.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
Fig.1
Charging
LEDs
On-Off
Switch
Charge
Socket.
01284 757500
01284 703534
Rotating Suspension
Hook
Suspension
Magnet.
www.sealey.co.uk
Web
sales@sealey.co.uk
email
LED013
Issue: 2 - 12/10/09
Advertisement
