Table of Contents
Advertisement
CHAPTER 5 GUIDE TO OPERATION
5.1 INSTALLATIONS
• Starting the drive.
➀
Turn on the power supply.
➁
Press the eject button. The tray is ejected from the drive.
➂
Place the disc according to each disc type as in the below figure.
Case type (BD, DVD-RAM) :
1. Insert so the label-side of the shutter is facing up.
2. Push the case disc about 2 cm towards the drive.
3. Press gently on the shutter-label so the BD/DVD-RAM disc sits firmly on the tray.
Non-case(Bare media) type :
1. Turn a disc so the label-side of the disc is facing up.
2. Place the outer edges of the disc to inner of the four disc holders (A,B,C,D).
3. Set the disc so it fits inside the disc guides.
➃
Press the eject button or press the tray lightly.
The tray is retracted automatically.
➄
Loading start.
Case type (BD, DVD-RAM)
CAUTION:
• Do not insert any foreign objects into the disc tray. This could result in a
malfunction.
• Do not manually force the tray to open.
• When the drive is not in use, keep the tray closed to protect against dust and dirt.
• Do not press down hard on the tray when loading a disc, since this may result
in damage to or malfunction of the tray.
A-10
1
3
Non-case(Bare media) type
2
A
B
C
D
Advertisement
Table of Contents
