Table of Contents
Advertisement
2.3
SETT ING UP WITH A D MX512
CONT ROLLER
2.3-1 DMX512 ADDRESSING WITHOUT ID ADDR ESSING
(
STAG MODE)
●
Conne ct the DMX512 controller to the units i n series .
Each u nit has 11 DMX channels so th e DMX Addresses should incr ease by increments of
●
11 ( e.g . 1,12,23,34... )
●
T he ID addr es s has no t been set so th er efore when u sing the contro ller CH11 must
be inactiv e ( CH11=0 ) .
It is als o possi ble to deactivate ID address selecting
●
on the fixture
Each D MX Address may be used as many times as r equired.
●
Any DMX address in t he range fr om 001 to 512 may be used.
●
Exampl e :
2.3-2 DMX512 ADDRESSING WITH ID ADDRESS STAG MODE )
Conne ct the DMX512 controller to the units i n series
●
Each u nit has 11 DMX channels so th e DMX Addresses should incr ease by increments of
●
11 ( e.g . 1,12,23,34... )
Each D MX Address may be used as many times as r equired.
●
Any DMX address in t he range fr om 001 to 512 may be used.
●
Each D MX addr ess may carry up to 66 separate ID a ddresses.
●
【
】
ID
should be s et in the menu on each unit in asce nding values
●
(i .e. 1,2,3...)
【
】
ID On
●
ID add resses ar e accessible fr om Ch 9 on the DMX512 controller.
●
ADD : 19 Lacist St. Wesbrark, Maine, U.S.A. (04092)
DM X A dd r.1
DM X Add r. 12
DM X512
CON TR OLL ER
【
should be set in the
Setti ng s
Phonel : (1) 207-712-3004
【
ID OFF
DMX Add r.2 3
. . . . . . . . . . . .
The figur e above sh ows a simple D MX512
layo ut with the s tart ing address of the first
uni t set at 1, with th e second set at 12 and
so o n... ( Note that when used in this way,
the CH11 ID functio n must be inac tive (CH11=0) )
】
menu on eac h unit.
5
TE-3X48RGBW PARLED AQUA
】
【
】
fr om the
Settings
menu.
(
sales@te-lighting.com
http://www.te-lighting.com
Advertisement
Table of Contents
