Samsung EO-MN910 Quick Start Manual

EO-MN910
Full User Manual Online:
For more information, refer to the user manual at www.samsung.com/support
The manual is available as an Adobe Acrobat file (.pdf). If you do not have Adobe Reader,
you can download the free program at www.adobe.com
Headquarters:
1301 East Lookout Drive Richardson, TX 75082
Customer Care Center: 1-800-SAMSUNG

Safety information

To prevent injury to yourself and others or damage to your device, read the safety information about your
device before using the device.
• Do not use your device with wet hands.
• Never crush or puncture the device.
• Do not insert the device or supplied accessories into the eyes, ears, or mouth.
• Follow all local regulations when disposing of used battery or device.
• Follow all safety warnings and regulations when using your device in restricted areas - driving, hospital,
potentially explosive environments, aircraft
• Do not use the device during a thunderstorm.
• Do not store your device in very hot or very cold areas. It is recommended to use your device at
temperatures from 5 °C to 35 °C.
• Do not store your device near magnetic fields.
• Do not use or store your device in areas with high concentrations of dust or airborne materials.
• Keep your device dry. If your device is wet, turn it off. Then, dry the device with a towel and take it to a
service centre.
• Do not disassemble, modify, or repair your device. If your device needs servicing, take it to a service centre.
Excessive exposure to loud sounds can cause hearing damage. Exposure to loud sounds
while driving may distract your attention and cause an accident.
Images and contents of this manual may differ from the product.
Make sure you have the following items: headset, charging case, travel adapter, ear rubbers
and user manual. The supplied items may vary.

Charging the headset

This headset has a rechargeable internal battery which is non-removable. Make sure the headset is
fully charged before using it for the first time.
Use only Samsung-approved chargers. Unauthorized or Non-Samsung chargers could cause
damage to the headset or in extreme circumstances an explosion, it could also invalidate any
warranty on the product.
1
Charge the charging case. When it is fully charged, the indicator light is changed to blue color.
With fully charged case, approximately 2-3 times charging possible.
2 Put your headset in the fully charged case and then turn on the case.
3 When the indicator light on the headset is changed to blue color, turn off the portable charger.

Turning the headset on or off

• To turn the headset on, slide the Power switch on. The blue indicator light flashes 4 times.
Turning the headset on for the first time, it will automatically enter pairing mode for approx. 3
minutes.
•
To turn the headset off, slide the Power switch off. The indicator light flashes blue and red then
turns off.

Turning the indicator light on or off

The Headset status light is there to show you the current status of your headset, but if it bothers you
at night, you can turn it off.
• Press and hold both Volume buttons simultaneously to turn the indicator light on or off.
•
You cannot switch the indicator off while in pairing mode.
• The indicator light will always work when the headset is turned on or off, when a call is
received, in Pairing mode and when the battery is low.

Wearing the headset

Depending on which ear you are going to wear the headset, simply adjust the ear hook accordingly.
If the ear rubber does not fit your ear, replace it with the other.
Pairing and connecting the headset with a phone
Pairing and connecting the headset with a phone
1 Enter Pairing mode. (The blue indicator light stays lit and stays for 3 minutes.)
•
Press and hold the Talk button for 3 seconds.
2
Activate the Bluetooth feature on your phone and search for the headset (see your phone's user
manual).
3
Select the headset (EO-MN910) from the list of devices found by your phone
4
If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to your
phone. Once pairing is completed, the headset will attempt to reconnect each time you turn it
on.
Reconnecting the headset
If the connection is lost while in use :
•
Press the Talk button on the headset or use the Bluetooth menu on your phone.
Disconnecting the headset
Turn off the headset or use the Bluetooth menu on your phone.
Draft
2014-07-11
GH68-xxxxxx
NA. 07/2014. sample