Advertisement
Heart Rate Sensor
Waterstars Storm can be equipped with two type of heart rate sensor: a 5.3kHz and the ANT+
protocol. You can decide which mode to us according to the heart rate strap you have, or what
kind of measurement would you like to carry out.
The 5.3kHz module senses the signals of older and low-cost straps, the ANT+ is the state of the
art technology to measure heart rate in a very accurate way, without the risk of interchanging
the starps' signals.
In case of the ANT+ mode, the strap must be approximated to a small vicinity (1 cm, 0.5") of the
instrument to pair them together.
5. Maintenance
The instrument does not require any special maintenance. Waterstars is waterproof, the USB
connector too. If water entered into the connector, we are suggesting you let it dry before
connecting to the computer or charger to maintain the proper operational conditions.
Please use a cotton cloth and clean water to clean the instrument and remove grit.
6. Technical specifications
Dimensions: 100 (W) X 65 (H) X 25 (D) [mm]
Weight: 129 g
Advertisement
